This is a note to let you know that I've just added the patch titled
ARM: dts: qcom: mdm9615: fix PMIC node labels
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-qcom-mdm9615-fix-pmic-node-labels.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit f9aa873e41e40384f0c983c2a4e5b9afba04071b
Author: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Date: Thu Sep 28 14:02:42 2023 +0300
ARM: dts: qcom: mdm9615: fix PMIC node labels
[ Upstream commit 0e4688cd4ee6efbeae2b31f75e16961fd7f72735 ]
Change PM8018 node labels to start with pm8018_ prefix, following other
Qualcomm PMIC device nodes.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230928110309.1212221-10-dmitry.baryshkov@xxxxxxxxxx
Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index 92c8003dac25..dac3aa793f71 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -76,7 +76,7 @@ reset-out-pins {
};
};
-&pmicgpio {
+&pm8018_gpio {
usb_vbus_5v_pins: usb-vbus-5v-state {
pins = "gpio4";
function = "normal";
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index 63e21aa23642..c0a60bae703b 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -261,7 +261,7 @@ qcom,ssbi@500000 {
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
- pmicintc: pmic {
+ pm8018: pmic {
compatible = "qcom,pm8018", "qcom,pm8921";
interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
@@ -272,38 +272,38 @@ pmicintc: pmic {
pwrkey@1c {
compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
reg = <0x1c>;
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8018>;
interrupts = <50 IRQ_TYPE_EDGE_RISING>,
<51 IRQ_TYPE_EDGE_RISING>;
debounce = <15625>;
pull-up;
};
- pmicmpp: mpps@50 {
+ pm8018_mpps: mpps@50 {
compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x50>;
gpio-controller;
#gpio-cells = <2>;
- gpio-ranges = <&pmicmpp 0 0 6>;
+ gpio-ranges = <&pm8018_mpps 0 0 6>;
};
rtc@11d {
compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
- interrupt-parent = <&pmicintc>;
+ interrupt-parent = <&pm8018>;
interrupts = <39 IRQ_TYPE_EDGE_RISING>;
reg = <0x11d>;
allow-set-time;
};
- pmicgpio: gpio@150 {
+ pm8018_gpio: gpio@150 {
compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
reg = <0x150>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
- gpio-ranges = <&pmicgpio 0 0 6>;
+ gpio-ranges = <&pm8018_gpio 0 0 6>;
#gpio-cells = <2>;
};
};
