This is a note to let you know that I've just added the patch titled
iio: adc: ad7091r: Set alert bit in config register
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
iio-adc-ad7091r-set-alert-bit-in-config-register.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit b10c2fb17af63766edf41f5062096ba00c4ee4e5
Author: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
Date: Sat Dec 16 14:46:37 2023 -0300
iio: adc: ad7091r: Set alert bit in config register
[ Upstream commit 149694f5e79b0c7a36ceb76e7c0d590db8f151c1 ]
The ad7091r-base driver sets up an interrupt handler for firing events
when inputs are either above or below a certain threshold.
However, for the interrupt signal to come from the device it must be
configured to enable the ALERT/BUSY/GPO pin to be used as ALERT, which
was not being done until now.
Enable interrupt signals on the ALERT/BUSY/GPO pin by setting the proper
bit in the configuration register.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
Link: https://lore.kernel.org/r/e8da2ee98d6df88318b14baf3dc9630e20218418.1702746240.git.marcelo.schmitt1@xxxxxxxxx
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Stable-dep-of: 020e71c7ffc2 ("iio: adc: ad7091r: Allow users to configure device events")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c
index 0e5d3d2e9c98..8aaa854f816f 100644
--- a/drivers/iio/adc/ad7091r-base.c
+++ b/drivers/iio/adc/ad7091r-base.c
@@ -28,6 +28,7 @@
#define AD7091R_REG_RESULT_CONV_RESULT(x) ((x) & 0xfff)
/* AD7091R_REG_CONF */
+#define AD7091R_REG_CONF_ALERT_EN BIT(4)
#define AD7091R_REG_CONF_AUTO BIT(8)
#define AD7091R_REG_CONF_CMD BIT(10)
@@ -232,6 +233,11 @@ int ad7091r_probe(struct device *dev, const char *name,
iio_dev->channels = chip_info->channels;
if (irq) {
+ ret = regmap_update_bits(st->map, AD7091R_REG_CONF,
+ AD7091R_REG_CONF_ALERT_EN, BIT(4));
+ if (ret)
+ return ret;
+
ret = devm_request_threaded_irq(dev, irq, NULL,
ad7091r_event_handler,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT, name, iio_dev);
