This is a note to let you know that I've just added the patch titled
serial: sc16is7xx: add check for unsupported SPI modes during probe
to the 5.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
serial-sc16is7xx-add-check-for-unsupported-spi-modes-during-probe.patch
and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 6d710b769c1f5f0d55c9ad9bb49b7dce009ec103 Mon Sep 17 00:00:00 2001
From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
Date: Thu, 21 Dec 2023 18:18:09 -0500
Subject: serial: sc16is7xx: add check for unsupported SPI modes during probe
From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
commit 6d710b769c1f5f0d55c9ad9bb49b7dce009ec103 upstream.
The original comment is confusing because it implies that variants other
than the SC16IS762 supports other SPI modes beside SPI_MODE_0.
Extract from datasheet:
The SC16IS762 differs from the SC16IS752 in that it supports SPI clock
speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the
SC16IS752... In all other aspects, the SC16IS762 is functionally and
electrically the same as the SC16IS752.
The same is also true of the SC16IS760 variant versus the SC16IS740 and
SC16IS750 variants.
For all variants, only SPI mode 0 is supported.
Change comment and abort probing if the specified SPI mode is not
SPI_MODE_0.
Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20231221231823.2327894-3-hugo@xxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/sc16is7xx.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1412,7 +1412,10 @@ static int sc16is7xx_spi_probe(struct sp
/* Setup SPI bus */
spi->bits_per_word = 8;
- /* only supports mode 0 on SC16IS762 */
+ /* For all variants, only mode 0 is supported */
+ if ((spi->mode & SPI_MODE_X_MASK) != SPI_MODE_0)
+ return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n");
+
spi->mode = spi->mode ? : SPI_MODE_0;
spi->max_speed_hz = spi->max_speed_hz ? : 15000000;
ret = spi_setup(spi);
Patches currently in stable-queue which might be from hvilleneuve@xxxxxxxxxxxx are
queue-5.4/serial-sc16is7xx-add-check-for-unsupported-spi-modes-during-probe.patch
queue-5.4/serial-sc16is7xx-set-safe-default-spi-clock-frequency.patch
