This is a note to let you know that I've just added the patch titled
serial: omap: do not override settings for RS485 support
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
serial-omap-do-not-override-settings-for-rs485-support.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 51f93776b84dee23e44a7be880736669a01cec2b Mon Sep 17 00:00:00 2001
From: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx>
Date: Wed, 3 Jan 2024 07:18:17 +0100
Subject: serial: omap: do not override settings for RS485 support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
From: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx>
commit 51f93776b84dee23e44a7be880736669a01cec2b upstream.
The drivers RS485 support is deactivated if there is no RTS GPIO available.
This is done by nullifying the ports rs485_supported struct. After that
however the settings in serial_omap_rs485_supported are assigned to the
same structure unconditionally, which results in an unintended reactivation
of RS485 support.
Fix this by moving the assignment to the beginning of
serial_omap_probe_rs485() and thus before uart_get_rs485_mode() gets
called.
Also replace the assignment of rs485_config() to have the complete RS485
setup in one function.
Fixes: e2752ae3cfc9 ("serial: omap: Disallow RS-485 if rts-gpio is not specified")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20240103061818.564-7-l.sanfilippo@xxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/omap-serial.c | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-)
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1483,6 +1483,13 @@ static struct omap_uart_port_info *of_ge
return omap_up_info;
}
+static const struct serial_rs485 serial_omap_rs485_supported = {
+ .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND |
+ SER_RS485_RX_DURING_TX,
+ .delay_rts_before_send = 1,
+ .delay_rts_after_send = 1,
+};
+
static int serial_omap_probe_rs485(struct uart_omap_port *up,
struct device *dev)
{
@@ -1497,6 +1504,9 @@ static int serial_omap_probe_rs485(struc
if (!np)
return 0;
+ up->port.rs485_config = serial_omap_config_rs485;
+ up->port.rs485_supported = serial_omap_rs485_supported;
+
ret = uart_get_rs485_mode(&up->port);
if (ret)
return ret;
@@ -1531,13 +1541,6 @@ static int serial_omap_probe_rs485(struc
return 0;
}
-static const struct serial_rs485 serial_omap_rs485_supported = {
- .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND |
- SER_RS485_RX_DURING_TX,
- .delay_rts_before_send = 1,
- .delay_rts_after_send = 1,
-};
-
static int serial_omap_probe(struct platform_device *pdev)
{
struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev);
@@ -1604,17 +1607,11 @@ static int serial_omap_probe(struct plat
dev_info(up->port.dev, "no wakeirq for uart%d\n",
up->port.line);
- ret = serial_omap_probe_rs485(up, &pdev->dev);
- if (ret < 0)
- goto err_rs485;
-
sprintf(up->name, "OMAP UART%d", up->port.line);
up->port.mapbase = mem->start;
up->port.membase = base;
up->port.flags = omap_up_info->flags;
up->port.uartclk = omap_up_info->uartclk;
- up->port.rs485_config = serial_omap_config_rs485;
- up->port.rs485_supported = serial_omap_rs485_supported;
if (!up->port.uartclk) {
up->port.uartclk = DEFAULT_CLK_SPEED;
dev_warn(&pdev->dev,
@@ -1622,6 +1619,10 @@ static int serial_omap_probe(struct plat
DEFAULT_CLK_SPEED);
}
+ ret = serial_omap_probe_rs485(up, &pdev->dev);
+ if (ret < 0)
+ goto err_rs485;
+
up->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE;
up->calc_latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE;
cpu_latency_qos_add_request(&up->pm_qos_request, up->latency);
Patches currently in stable-queue which might be from l.sanfilippo@xxxxxxxxxx are
queue-6.6/serial-omap-do-not-override-settings-for-rs485-support.patch
queue-6.6/serial-core-imx-do-not-set-rs485-enabled-if-it-is-not-supported.patch
queue-6.6/serial-8250_exar-set-missing-rs485_supported-flag.patch
queue-6.6/serial-core-fix-sanitizing-check-for-rts-settings.patch
queue-6.6/serial-core-make-sure-rs485-cannot-be-enabled-when-it-is-not-supported.patch
