This is a note to let you know that I've just added the patch titled
pwm: stm32: Use regmap_clear_bits and regmap_set_bits where applicable
to the 5.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
pwm-stm32-use-regmap_clear_bits-and-regmap_set_bits-.patch
and it can be found in the queue-5.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 7a204970a61102eb5a7fe4e2048cb1f6aaf46390
Author: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Date: Fri Dec 2 19:35:18 2022 +0100
pwm: stm32: Use regmap_clear_bits and regmap_set_bits where applicable
[ Upstream commit 632ae5d7eb348b3ef88552ec0999260b6f9d6ab1 ]
Found using coccinelle and the following semantic patch:
@@
expression map, reg, bits;
@@
- regmap_update_bits(map, reg, bits, bits)
+ regmap_set_bits(map, reg, bits)
@@
expression map, reg, bits;
@@
- regmap_update_bits(map, reg, bits, 0)
+ regmap_clear_bits(map, reg, bits)
Tested-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20221115111347.3705732-6-u.kleine-koenig@xxxxxxxxxxxxxx
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Signed-off-by: Thierry Reding <thierry.reding@xxxxxxxxx>
Stable-dep-of: 19f1016ea960 ("pwm: stm32: Fix enable count for clk in .probe()")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c
index d3be944f2ae9..945eed3ffb81 100644
--- a/drivers/pwm/pwm-stm32.c
+++ b/drivers/pwm/pwm-stm32.c
@@ -115,14 +115,14 @@ static int stm32_pwm_raw_capture(struct stm32_pwm *priv, struct pwm_device *pwm,
int ret;
/* Ensure registers have been updated, enable counter and capture */
- regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
- regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, TIM_CR1_CEN);
+ regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG);
+ regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN);
/* Use cc1 or cc3 DMA resp for PWM input channels 1 & 2 or 3 & 4 */
dma_id = pwm->hwpwm < 2 ? STM32_TIMERS_DMA_CH1 : STM32_TIMERS_DMA_CH3;
ccen = pwm->hwpwm < 2 ? TIM_CCER_CC12E : TIM_CCER_CC34E;
ccr = pwm->hwpwm < 2 ? TIM_CCR1 : TIM_CCR3;
- regmap_update_bits(priv->regmap, TIM_CCER, ccen, ccen);
+ regmap_set_bits(priv->regmap, TIM_CCER, ccen);
/*
* Timer DMA burst mode. Request 2 registers, 2 bursts, to get both
@@ -160,8 +160,8 @@ static int stm32_pwm_raw_capture(struct stm32_pwm *priv, struct pwm_device *pwm,
}
stop:
- regmap_update_bits(priv->regmap, TIM_CCER, ccen, 0);
- regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0);
+ regmap_clear_bits(priv->regmap, TIM_CCER, ccen);
+ regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN);
return ret;
}
@@ -359,7 +359,7 @@ static int stm32_pwm_config(struct stm32_pwm *priv, int ch,
regmap_write(priv->regmap, TIM_PSC, prescaler);
regmap_write(priv->regmap, TIM_ARR, prd - 1);
- regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, TIM_CR1_ARPE);
+ regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE);
/* Calculate the duty cycles */
dty = prd * duty_ns;
@@ -377,7 +377,7 @@ static int stm32_pwm_config(struct stm32_pwm *priv, int ch,
else
regmap_update_bits(priv->regmap, TIM_CCMR2, mask, ccmr);
- regmap_update_bits(priv->regmap, TIM_BDTR, TIM_BDTR_MOE, TIM_BDTR_MOE);
+ regmap_set_bits(priv->regmap, TIM_BDTR, TIM_BDTR_MOE);
return 0;
}
@@ -411,13 +411,13 @@ static int stm32_pwm_enable(struct stm32_pwm *priv, int ch)
if (priv->have_complementary_output)
mask |= TIM_CCER_CC1NE << (ch * 4);
- regmap_update_bits(priv->regmap, TIM_CCER, mask, mask);
+ regmap_set_bits(priv->regmap, TIM_CCER, mask);
/* Make sure that registers are updated */
- regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
+ regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG);
/* Enable controller */
- regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, TIM_CR1_CEN);
+ regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN);
return 0;
}
@@ -431,11 +431,11 @@ static void stm32_pwm_disable(struct stm32_pwm *priv, int ch)
if (priv->have_complementary_output)
mask |= TIM_CCER_CC1NE << (ch * 4);
- regmap_update_bits(priv->regmap, TIM_CCER, mask, 0);
+ regmap_clear_bits(priv->regmap, TIM_CCER, mask);
/* When all channels are disabled, we can disable the controller */
if (!active_channels(priv))
- regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0);
+ regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN);
clk_disable(priv->clk);
}
@@ -568,10 +568,9 @@ static void stm32_pwm_detect_complementary(struct stm32_pwm *priv)
* If complementary bit doesn't exist writing 1 will have no
* effect so we can detect it.
*/
- regmap_update_bits(priv->regmap,
- TIM_CCER, TIM_CCER_CC1NE, TIM_CCER_CC1NE);
+ regmap_set_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE);
regmap_read(priv->regmap, TIM_CCER, &ccer);
- regmap_update_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE, 0);
+ regmap_clear_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE);
priv->have_complementary_output = (ccer != 0);
}
@@ -585,10 +584,9 @@ static int stm32_pwm_detect_channels(struct stm32_pwm *priv)
* If channels enable bits don't exist writing 1 will have no
* effect so we can detect and count them.
*/
- regmap_update_bits(priv->regmap,
- TIM_CCER, TIM_CCER_CCXE, TIM_CCER_CCXE);
+ regmap_set_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE);
regmap_read(priv->regmap, TIM_CCER, &ccer);
- regmap_update_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE, 0);
+ regmap_clear_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE);
if (ccer & TIM_CCER_CC1E)
npwm++;
