This is a note to let you know that I've just added the patch titled arm64: dts: imx8mm: Reduce GPU to nominal speed to the 6.6-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-imx8mm-reduce-gpu-to-nominal-speed.patch and it can be found in the queue-6.6 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 75fbd320269d44371f9de746c6f72a0b02b39f05 Author: Adam Ford <aford173@xxxxxxxxx> Date: Tue Nov 28 14:02:16 2023 -0600 arm64: dts: imx8mm: Reduce GPU to nominal speed [ Upstream commit 1f794d3eed5345413c2b0cf1bcccc92d77681220 ] When the GPU nodes were added, the GPU_PLL_OUT was configured for 1000MHz, but this requires the SoC to run in overdrive mode which requires an elevated voltage operating point. Since this may run some boards out of spec, the default clock should be set to 800MHz for nominal operating mode. Boards that run at the higher voltage can update their clocks accordingly. Fixes: 4523be8e46be ("arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core") Signed-off-by: Adam Ford <aford173@xxxxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 738024baaa57..54faf83cb436 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -1408,7 +1408,7 @@ gpu_3d: gpu@38000000 { assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>, <&clk IMX8MM_GPU_PLL_OUT>; assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; - assigned-clock-rates = <0>, <1000000000>; + assigned-clock-rates = <0>, <800000000>; power-domains = <&pgc_gpu>; }; @@ -1423,7 +1423,7 @@ gpu_2d: gpu@38008000 { assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>, <&clk IMX8MM_GPU_PLL_OUT>; assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; - assigned-clock-rates = <0>, <1000000000>; + assigned-clock-rates = <0>, <800000000>; power-domains = <&pgc_gpu>; };