This is a note to let you know that I've just added the patch titled
mmc: sdhci-sprd: Fix eMMC init failure after hw reset
to the 5.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mmc-sdhci-sprd-fix-emmc-init-failure-after-hw-reset.patch
and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 8abf77c88929b6d20fa4f9928b18d6448d64e293 Mon Sep 17 00:00:00 2001
From: Wenchao Chen <wenchao.chen@xxxxxxxxxx>
Date: Mon, 4 Dec 2023 14:49:34 +0800
Subject: mmc: sdhci-sprd: Fix eMMC init failure after hw reset
From: Wenchao Chen <wenchao.chen@xxxxxxxxxx>
commit 8abf77c88929b6d20fa4f9928b18d6448d64e293 upstream.
Some eMMC devices that do not close the auto clk gate after hw reset will
cause eMMC initialization to fail. Let's fix this.
Signed-off-by: Wenchao Chen <wenchao.chen@xxxxxxxxxx>
Fixes: ff874dbc4f86 ("mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K")
Reviewed-by: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20231204064934.21236-1-wenchao.chen@xxxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-sprd.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -223,15 +223,19 @@ static inline void _sdhci_sprd_set_clock
div = ((div & 0x300) >> 2) | ((div & 0xFF) << 8);
sdhci_enable_clk(host, div);
+ val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI);
+ mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN | SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN;
/* Enable CLK_AUTO when the clock is greater than 400K. */
if (clk > 400000) {
- val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI);
- mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN |
- SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN;
if (mask != (val & mask)) {
val |= mask;
sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI);
}
+ } else {
+ if (val & mask) {
+ val &= ~mask;
+ sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI);
+ }
}
}
Patches currently in stable-queue which might be from wenchao.chen@xxxxxxxxxx are
queue-5.4/mmc-sdhci-sprd-fix-emmc-init-failure-after-hw-reset.patch
