This is a note to let you know that I've just added the patch titled
igc: Check VLAN TCI mask
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
igc-check-vlan-tci-mask.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit ab151d4a86bceafa58b773d11dd768f176a291af
Author: Kurt Kanzenbach <kurt@xxxxxxxxxxxxx>
Date: Fri Dec 1 08:50:43 2023 +0100
igc: Check VLAN TCI mask
[ Upstream commit b5063cbe148b829e8eb97672c2cbccc058835476 ]
Currently the driver accepts VLAN TCI steering rules regardless of the
configured mask. And things might fail silently or with confusing error
messages to the user.
There are two ways to handle the VLAN TCI mask:
1. Match on the PCP field using a VLAN prio filter
2. Match on complete TCI field using a flex filter
Therefore, add checks and code for that.
For instance the following rule is invalid and will be converted into a
VLAN prio rule which is not correct:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|Added rule with ID 61
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 61
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x0 mask: 0xffff
| VLAN: 0x1 mask: 0x1fff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 1
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|rmgr: Cannot insert RX class rule: Operation not supported
Fixes: 7991487ecb2d ("igc: Allow for Flex Filters to be installed")
Signed-off-by: Kurt Kanzenbach <kurt@xxxxxxxxxxxxx>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@xxxxxxxxx>
Reviewed-by: Simon Horman <horms@xxxxxxxxxx>
Tested-by: Naama Meir <naamax.meir@xxxxxxxxxxxxxxx>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
index 43c05b41627f7..2a894ca49d93b 100644
--- a/drivers/net/ethernet/intel/igc/igc.h
+++ b/drivers/net/ethernet/intel/igc/igc.h
@@ -538,6 +538,7 @@ struct igc_nfc_filter {
u16 etype;
__be16 vlan_etype;
u16 vlan_tci;
+ u16 vlan_tci_mask;
u8 src_addr[ETH_ALEN];
u8 dst_addr[ETH_ALEN];
u8 user_data[8];
diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
index 51ef18060dbc4..e146357d61a8a 100644
--- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
+++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
@@ -957,6 +957,7 @@ static int igc_ethtool_set_coalesce(struct net_device *netdev,
}
#define ETHER_TYPE_FULL_MASK ((__force __be16)~0)
+#define VLAN_TCI_FULL_MASK ((__force __be16)~0)
static int igc_ethtool_get_nfc_rule(struct igc_adapter *adapter,
struct ethtool_rxnfc *cmd)
{
@@ -988,7 +989,7 @@ static int igc_ethtool_get_nfc_rule(struct igc_adapter *adapter,
if (rule->filter.match_flags & IGC_FILTER_FLAG_VLAN_TCI) {
fsp->flow_type |= FLOW_EXT;
fsp->h_ext.vlan_tci = htons(rule->filter.vlan_tci);
- fsp->m_ext.vlan_tci = htons(VLAN_PRIO_MASK);
+ fsp->m_ext.vlan_tci = htons(rule->filter.vlan_tci_mask);
}
if (rule->filter.match_flags & IGC_FILTER_FLAG_DST_MAC_ADDR) {
@@ -1223,6 +1224,7 @@ static void igc_ethtool_init_nfc_rule(struct igc_nfc_rule *rule,
if ((fsp->flow_type & FLOW_EXT) && fsp->m_ext.vlan_tci) {
rule->filter.vlan_tci = ntohs(fsp->h_ext.vlan_tci);
+ rule->filter.vlan_tci_mask = ntohs(fsp->m_ext.vlan_tci);
rule->filter.match_flags |= IGC_FILTER_FLAG_VLAN_TCI;
}
@@ -1260,11 +1262,19 @@ static void igc_ethtool_init_nfc_rule(struct igc_nfc_rule *rule,
memcpy(rule->filter.user_mask, fsp->m_ext.data, sizeof(fsp->m_ext.data));
}
- /* When multiple filter options or user data or vlan etype is set, use a
- * flex filter.
+ /* The i225/i226 has various different filters. Flex filters provide a
+ * way to match up to the first 128 bytes of a packet. Use them for:
+ * a) For specific user data
+ * b) For VLAN EtherType
+ * c) For full TCI match
+ * d) Or in case multiple filter criteria are set
+ *
+ * Otherwise, use the simple MAC, VLAN PRIO or EtherType filters.
*/
if ((rule->filter.match_flags & IGC_FILTER_FLAG_USER_DATA) ||
(rule->filter.match_flags & IGC_FILTER_FLAG_VLAN_ETYPE) ||
+ ((rule->filter.match_flags & IGC_FILTER_FLAG_VLAN_TCI) &&
+ rule->filter.vlan_tci_mask == ntohs(VLAN_TCI_FULL_MASK)) ||
(rule->filter.match_flags & (rule->filter.match_flags - 1)))
rule->flex = true;
else
@@ -1334,6 +1344,18 @@ static int igc_ethtool_add_nfc_rule(struct igc_adapter *adapter,
return -EINVAL;
}
+ /* There are two ways to match the VLAN TCI:
+ * 1. Match on PCP field and use vlan prio filter for it
+ * 2. Match on complete TCI field and use flex filter for it
+ */
+ if ((fsp->flow_type & FLOW_EXT) &&
+ fsp->m_ext.vlan_tci &&
+ fsp->m_ext.vlan_tci != htons(VLAN_PRIO_MASK) &&
+ fsp->m_ext.vlan_tci != VLAN_TCI_FULL_MASK) {
+ netdev_dbg(netdev, "VLAN mask not supported\n");
+ return -EOPNOTSUPP;
+ }
+
if (fsp->location >= IGC_MAX_RXNFC_RULES) {
netdev_dbg(netdev, "Invalid location\n");
return -EINVAL;
