This is a note to let you know that I've just added the patch titled
amd-xgbe: propagate the correct speed and duplex status
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
amd-xgbe-propagate-the-correct-speed-and-duplex-stat.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 5bf82eabd5d340346af9fe0275a86fa57bf6bd67
Author: Raju Rangoju <Raju.Rangoju@xxxxxxx>
Date: Wed Nov 22 00:44:35 2023 +0530
amd-xgbe: propagate the correct speed and duplex status
[ Upstream commit 7a2323ac24a50311f64a3a9b54ed5bef5821ecae ]
xgbe_get_link_ksettings() does not propagate correct speed and duplex
information to ethtool during cable unplug. Due to which ethtool reports
incorrect values for speed and duplex.
Address this by propagating correct information.
Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
Signed-off-by: Raju Rangoju <Raju.Rangoju@xxxxxxx>
Reviewed-by: Wojciech Drewek <wojciech.drewek@xxxxxxxxx>
Signed-off-by: Paolo Abeni <pabeni@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
index 6e83ff59172a3..32fab5e772462 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -314,10 +314,15 @@ static int xgbe_get_link_ksettings(struct net_device *netdev,
cmd->base.phy_address = pdata->phy.address;
- cmd->base.autoneg = pdata->phy.autoneg;
- cmd->base.speed = pdata->phy.speed;
- cmd->base.duplex = pdata->phy.duplex;
+ if (netif_carrier_ok(netdev)) {
+ cmd->base.speed = pdata->phy.speed;
+ cmd->base.duplex = pdata->phy.duplex;
+ } else {
+ cmd->base.speed = SPEED_UNKNOWN;
+ cmd->base.duplex = DUPLEX_UNKNOWN;
+ }
+ cmd->base.autoneg = pdata->phy.autoneg;
cmd->base.port = PORT_NONE;
XGBE_LM_COPY(cmd, supported, lks, supported);
