Patch "media: qcom: camss: Fix VFE-480 vfe_disable_output()" has been added to the 6.6-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    media: qcom: camss: Fix VFE-480 vfe_disable_output()

to the 6.6-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     media-qcom-camss-fix-vfe-480-vfe_disable_output.patch
and it can be found in the queue-6.6 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 7f24d291350426d40b36dfbe6b3090617cdfd37a Mon Sep 17 00:00:00 2001
From: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Date: Wed, 30 Aug 2023 16:16:11 +0100
Subject: media: qcom: camss: Fix VFE-480 vfe_disable_output()

From: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>

commit 7f24d291350426d40b36dfbe6b3090617cdfd37a upstream.

vfe-480 is copied from vfe-17x and has the same racy idle timeout bug as in
17x.

Fix the vfe_disable_output() logic to no longer be racy and to conform
to the 17x way of quiescing and then resetting the VFE.

Fixes: 4edc8eae715c ("media: camss: Add initial support for VFE hardware version Titan 480")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/media/platform/qcom/camss/camss-vfe-480.c |   22 +++-------------------
 1 file changed, 3 insertions(+), 19 deletions(-)

--- a/drivers/media/platform/qcom/camss/camss-vfe-480.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-480.c
@@ -8,7 +8,6 @@
  * Copyright (C) 2021 Jonathan Marek
  */
 
-#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
@@ -328,35 +327,20 @@ static int vfe_enable_output(struct vfe_
 	return 0;
 }
 
-static int vfe_disable_output(struct vfe_line *line)
+static void vfe_disable_output(struct vfe_line *line)
 {
 	struct vfe_device *vfe = to_vfe(line);
 	struct vfe_output *output = &line->output;
 	unsigned long flags;
 	unsigned int i;
-	bool done;
-	int timeout = 0;
-
-	do {
-		spin_lock_irqsave(&vfe->output_lock, flags);
-		done = !output->gen2.active_num;
-		spin_unlock_irqrestore(&vfe->output_lock, flags);
-		usleep_range(10000, 20000);
-
-		if (timeout++ == 100) {
-			dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
-			vfe_reset(vfe);
-			output->gen2.active_num = 0;
-			return 0;
-		}
-	} while (!done);
 
 	spin_lock_irqsave(&vfe->output_lock, flags);
 	for (i = 0; i < output->wm_num; i++)
 		vfe_wm_stop(vfe, output->wm_idx[i]);
+	output->gen2.active_num = 0;
 	spin_unlock_irqrestore(&vfe->output_lock, flags);
 
-	return 0;
+	vfe_reset(vfe);
 }
 
 /*


Patches currently in stable-queue which might be from bryan.odonoghue@xxxxxxxxxx are

queue-6.6/media-qcom-camss-fix-vfe-480-vfe_disable_output.patch
queue-6.6/media-qcom-camss-fix-missing-vfe_lite-clocks-check.patch
queue-6.6/media-qcom-camss-fix-vfe-17x-vfe_disable_output.patch
queue-6.6/media-qcom-camss-fix-set-csi2_rx_cfg1_vc_mode-when-vc-is-greater-than-3.patch
queue-6.6/media-qcom-camss-fix-vfe_get-error-jump.patch
queue-6.6/media-qcom-camss-fix-csid-gen2-for-test-pattern-generator.patch
queue-6.6/media-qcom-camss-fix-pm_domain_on-sequence-in-probe.patch
queue-6.6/media-qcom-camss-fix-invalid-clock-enable-bit-disjunction.patch



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux