This is a note to let you know that I've just added the patch titled
media: qcom: camss: Fix VFE-17x vfe_disable_output()
to the 6.5-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
media-qcom-camss-fix-vfe-17x-vfe_disable_output.patch
and it can be found in the queue-6.5 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 3143ad282fc08bf995ee73e32a9e40c527bf265d Mon Sep 17 00:00:00 2001
From: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Date: Wed, 30 Aug 2023 16:16:10 +0100
Subject: media: qcom: camss: Fix VFE-17x vfe_disable_output()
From: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
commit 3143ad282fc08bf995ee73e32a9e40c527bf265d upstream.
There are two problems with the current vfe_disable_output() routine.
Firstly we rightly use a spinlock to protect output->gen2.active_num
everywhere except for in the IDLE timeout path of vfe_disable_output().
Even if that is not racy "in practice" somehow it is by happenstance not
by design.
Secondly we do not get consistent behaviour from this routine. On
sc8280xp 50% of the time I get "VFE idle timeout - resetting". In this
case the subsequent capture will succeed. The other 50% of the time, we
don't hit the idle timeout, never do the VFE reset and subsequent
captures stall indefinitely.
Rewrite the vfe_disable_output() routine to
- Quiesce write masters with vfe_wm_stop()
- Set active_num = 0
remembering to hold the spinlock when we do so followed by
- Reset the VFE
Testing on sc8280xp and sdm845 shows this to be a valid fix.
Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/media/platform/qcom/camss/camss-vfe-170.c | 22 +++-------------------
1 file changed, 3 insertions(+), 19 deletions(-)
--- a/drivers/media/platform/qcom/camss/camss-vfe-170.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
@@ -7,7 +7,6 @@
* Copyright (C) 2020-2021 Linaro Ltd.
*/
-#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
@@ -494,35 +493,20 @@ static int vfe_enable_output(struct vfe_
return 0;
}
-static int vfe_disable_output(struct vfe_line *line)
+static void vfe_disable_output(struct vfe_line *line)
{
struct vfe_device *vfe = to_vfe(line);
struct vfe_output *output = &line->output;
unsigned long flags;
unsigned int i;
- bool done;
- int timeout = 0;
-
- do {
- spin_lock_irqsave(&vfe->output_lock, flags);
- done = !output->gen2.active_num;
- spin_unlock_irqrestore(&vfe->output_lock, flags);
- usleep_range(10000, 20000);
-
- if (timeout++ == 100) {
- dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
- vfe_reset(vfe);
- output->gen2.active_num = 0;
- return 0;
- }
- } while (!done);
spin_lock_irqsave(&vfe->output_lock, flags);
for (i = 0; i < output->wm_num; i++)
vfe_wm_stop(vfe, output->wm_idx[i]);
+ output->gen2.active_num = 0;
spin_unlock_irqrestore(&vfe->output_lock, flags);
- return 0;
+ vfe_reset(vfe);
}
/*
Patches currently in stable-queue which might be from bryan.odonoghue@xxxxxxxxxx are
queue-6.5/media-qcom-camss-fix-vfe-480-vfe_disable_output.patch
queue-6.5/media-qcom-camss-fix-missing-vfe_lite-clocks-check.patch
queue-6.5/media-qcom-camss-fix-vfe-17x-vfe_disable_output.patch
queue-6.5/media-qcom-camss-fix-set-csi2_rx_cfg1_vc_mode-when-vc-is-greater-than-3.patch
queue-6.5/media-qcom-camss-fix-vfe_get-error-jump.patch
queue-6.5/media-qcom-camss-fix-csid-gen2-for-test-pattern-generator.patch
queue-6.5/media-qcom-camss-fix-pm_domain_on-sequence-in-probe.patch
queue-6.5/media-qcom-camss-fix-invalid-clock-enable-bit-disjunction.patch
