Patch "serial: meson: Use platform_get_irq() to get the interrupt" has been added to the 5.15-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    serial: meson: Use platform_get_irq() to get the interrupt

to the 5.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     serial-meson-use-platform_get_irq-to-get-the-interru.patch
and it can be found in the queue-5.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit f365a310f65daf3666352285250605530f4ebebe
Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Date:   Fri Dec 24 14:29:10 2021 +0000

    serial: meson: Use platform_get_irq() to get the interrupt
    
    [ Upstream commit 5b68061983471470d4109bac776145245f06bc09 ]
    
    platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
    allocation of IRQ resources in DT core code, this causes an issue
    when using hierarchical interrupt domains using "interrupts" property
    in the node as this bypasses the hierarchical setup and messes up the
    irq chaining.
    
    In preparation for removal of static setup of IRQ resource from DT core
    code use platform_get_irq().
    
    Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
    Link: https://lore.kernel.org/r/20211224142917.6966-5-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx
    Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
    Stable-dep-of: 2a1d728f20ed ("tty: serial: meson: fix hard LOCKUP on crtscts mode")
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 62e6c1af13445..b6e8db0ddf065 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -726,10 +726,11 @@ static int meson_uart_probe_clocks(struct platform_device *pdev,
 
 static int meson_uart_probe(struct platform_device *pdev)
 {
-	struct resource *res_mem, *res_irq;
+	struct resource *res_mem;
 	struct uart_port *port;
 	u32 fifosize = 64; /* Default is 64, 128 for EE UART_0 */
 	int ret = 0;
+	int irq;
 
 	if (pdev->dev.of_node)
 		pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
@@ -752,9 +753,9 @@ static int meson_uart_probe(struct platform_device *pdev)
 	if (!res_mem)
 		return -ENODEV;
 
-	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res_irq)
-		return -ENODEV;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
 
 	of_property_read_u32(pdev->dev.of_node, "fifo-size", &fifosize);
 
@@ -779,7 +780,7 @@ static int meson_uart_probe(struct platform_device *pdev)
 	port->iotype = UPIO_MEM;
 	port->mapbase = res_mem->start;
 	port->mapsize = resource_size(res_mem);
-	port->irq = res_irq->start;
+	port->irq = irq;
 	port->flags = UPF_BOOT_AUTOCONF | UPF_LOW_LATENCY;
 	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MESON_CONSOLE);
 	port->dev = &pdev->dev;



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux