This is a note to let you know that I've just added the patch titled
gpiolib: acpi: Add a ignore interrupt quirk for Peaq C1010
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
gpiolib-acpi-add-a-ignore-interrupt-quirk-for-peaq-c.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit aceec723195f1caa9bf39c2a6191d16174e0d78e
Author: Hans de Goede <hdegoede@xxxxxxxxxx>
Date: Sat Sep 9 16:18:10 2023 +0200
gpiolib: acpi: Add a ignore interrupt quirk for Peaq C1010
[ Upstream commit 6cc64f6173751d212c9833bde39e856b4f585a3e ]
On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to
a "dolby" button. At the ACPI level an _AEI event-handler
is connected which sets an ACPI variable to 1 on both
edges. This variable can be polled + cleared to 0 using WMI.
Since the variable is set on both edges the WMI interface is pretty
useless even when polling. So instead of writing a custom WMI
driver for this the x86-android-tablets code instantiates
a gpio-keys platform device for the "dolby" button.
Add an ignore_interrupt quirk for INT33FC:00 pin 3 on the Peaq C1010,
so that it is not seen as busy when the gpio-keys driver requests it.
Note this replaces a hack in x86-android-tablets where it would
call acpi_gpiochip_free_interrupts() on the INT33FC:00 GPIO
controller. acpi_gpiochip_free_interrupts() is considered private
(internal) gpiolib API so x86-android-tablets should stop using it.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230909141816.58358-3-hdegoede@xxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 51e41676de0b8..5d04720107ef5 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1655,6 +1655,26 @@ static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = {
.ignore_wake = "SYNA1202:00@16",
},
},
+ {
+ /*
+ * On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to
+ * a "dolby" button. At the ACPI level an _AEI event-handler
+ * is connected which sets an ACPI variable to 1 on both
+ * edges. This variable can be polled + cleared to 0 using
+ * WMI. But since the variable is set on both edges the WMI
+ * interface is pretty useless even when polling.
+ * So instead the x86-android-tablets code instantiates
+ * a gpio-keys platform device for it.
+ * Ignore the _AEI handler for the pin, so that it is not busy.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "PEAQ"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PEAQ PMM C1010 MD99187"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_interrupt = "INT33FC:00@3",
+ },
+ },
{} /* Terminating entry */
};
