Patch "wifi: mac80211: move scan work to wiphy work" has been added to the 6.6-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    wifi: mac80211: move scan work to wiphy work

to the 6.6-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     wifi-mac80211-move-scan-work-to-wiphy-work.patch
and it can be found in the queue-6.6 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 4ae7eebc7ae436846c54724c7d6db4c80706738b
Author: Johannes Berg <johannes.berg@xxxxxxxxx>
Date:   Mon Aug 28 13:59:39 2023 +0200

    wifi: mac80211: move scan work to wiphy work
    
    [ Upstream commit 201712512cbbda360f62c222a4bab260350462a0 ]
    
    Move the scan work to wiphy work, which also simplifies
    the way we handle the work vs. the scan configuration.
    
    Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx>
    Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
    Stable-dep-of: eadfb54756ae ("wifi: mac80211: move sched-scan stop work to wiphy work")
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 358c8865f909a..4e98e03e5de64 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1490,7 +1490,7 @@ struct ieee80211_local {
 
 	unsigned long leave_oper_channel_time;
 	enum mac80211_scan_state next_scan_state;
-	struct delayed_work scan_work;
+	struct wiphy_delayed_work scan_work;
 	struct ieee80211_sub_if_data __rcu *scan_sdata;
 	/* For backward compatibility only -- do not use */
 	struct cfg80211_chan_def _oper_chandef;
@@ -1929,7 +1929,7 @@ int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata,
 			      u64 *changed);
 
 /* scan/BSS handling */
-void ieee80211_scan_work(struct work_struct *work);
+void ieee80211_scan_work(struct wiphy *wiphy, struct wiphy_work *work);
 int ieee80211_request_ibss_scan(struct ieee80211_sub_if_data *sdata,
 				const u8 *ssid, u8 ssid_len,
 				struct ieee80211_channel **channels,
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index be586bc0b5b7d..6e3bfb46af44d 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -691,7 +691,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, bool going_do
 	ieee80211_recalc_ps(local);
 
 	if (cancel_scan)
-		flush_delayed_work(&local->scan_work);
+		wiphy_delayed_work_flush(local->hw.wiphy, &local->scan_work);
 
 	if (local->open_count == 0) {
 		ieee80211_stop_device(local);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 3bbd66e5a0df0..adb8637a37445 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -335,9 +335,7 @@ static void ieee80211_restart_work(struct work_struct *work)
 	struct ieee80211_sub_if_data *sdata;
 	int ret;
 
-	/* wait for scan work complete */
 	flush_workqueue(local->workqueue);
-	flush_work(&local->sched_scan_stopped_work);
 
 	rtnl_lock();
 	/* we might do interface manipulations, so need both */
@@ -808,7 +806,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
 	INIT_LIST_HEAD(&local->chanctx_list);
 	mutex_init(&local->chanctx_mtx);
 
-	INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
+	wiphy_delayed_work_init(&local->scan_work, ieee80211_scan_work);
 
 	INIT_WORK(&local->restart_work, ieee80211_restart_work);
 
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 0805aa8603c61..2117cb2a916ac 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -274,8 +274,8 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
 		 * the beacon/proberesp rx gives us an opportunity to upgrade
 		 * to active scan
 		 */
-		 set_bit(SCAN_BEACON_DONE, &local->scanning);
-		 ieee80211_queue_delayed_work(&local->hw, &local->scan_work, 0);
+		set_bit(SCAN_BEACON_DONE, &local->scanning);
+		wiphy_delayed_work_queue(local->hw.wiphy, &local->scan_work, 0);
 	}
 
 	if (ieee80211_is_probe_resp(mgmt->frame_control)) {
@@ -505,7 +505,7 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw,
 
 	memcpy(&local->scan_info, info, sizeof(*info));
 
-	ieee80211_queue_delayed_work(&local->hw, &local->scan_work, 0);
+	wiphy_delayed_work_queue(local->hw.wiphy, &local->scan_work, 0);
 }
 EXPORT_SYMBOL(ieee80211_scan_completed);
 
@@ -545,8 +545,7 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local,
 	/* We need to set power level at maximum rate for scanning. */
 	ieee80211_hw_config(local, 0);
 
-	ieee80211_queue_delayed_work(&local->hw,
-				     &local->scan_work, 0);
+	wiphy_delayed_work_queue(local->hw.wiphy, &local->scan_work, 0);
 
 	return 0;
 }
@@ -603,8 +602,8 @@ void ieee80211_run_deferred_scan(struct ieee80211_local *local)
 					lockdep_is_held(&local->mtx))))
 		return;
 
-	ieee80211_queue_delayed_work(&local->hw, &local->scan_work,
-				     round_jiffies_relative(0));
+	wiphy_delayed_work_queue(local->hw.wiphy, &local->scan_work,
+				 round_jiffies_relative(0));
 }
 
 static void ieee80211_send_scan_probe_req(struct ieee80211_sub_if_data *sdata,
@@ -795,8 +794,8 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 		}
 
 		/* Now, just wait a bit and we are all done! */
-		ieee80211_queue_delayed_work(&local->hw, &local->scan_work,
-					     next_delay);
+		wiphy_delayed_work_queue(local->hw.wiphy, &local->scan_work,
+					 next_delay);
 		return 0;
 	} else {
 		/* Do normal software scan */
@@ -1043,7 +1042,7 @@ static void ieee80211_scan_state_resume(struct ieee80211_local *local,
 	local->next_scan_state = SCAN_SET_CHANNEL;
 }
 
-void ieee80211_scan_work(struct work_struct *work)
+void ieee80211_scan_work(struct wiphy *wiphy, struct wiphy_work *work)
 {
 	struct ieee80211_local *local =
 		container_of(work, struct ieee80211_local, scan_work.work);
@@ -1137,7 +1136,8 @@ void ieee80211_scan_work(struct work_struct *work)
 		}
 	} while (next_delay == 0);
 
-	ieee80211_queue_delayed_work(&local->hw, &local->scan_work, next_delay);
+	wiphy_delayed_work_queue(local->hw.wiphy, &local->scan_work,
+				 next_delay);
 	goto out;
 
 out_complete:
@@ -1280,12 +1280,7 @@ void ieee80211_scan_cancel(struct ieee80211_local *local)
 		goto out;
 	}
 
-	/*
-	 * If the work is currently running, it must be blocked on
-	 * the mutex, but we'll set scan_sdata = NULL and it'll
-	 * simply exit once it acquires the mutex.
-	 */
-	cancel_delayed_work(&local->scan_work);
+	wiphy_delayed_work_cancel(local->hw.wiphy, &local->scan_work);
 	/* and clean up */
 	memset(&local->scan_info, 0, sizeof(local->scan_info));
 	__ieee80211_scan_completed(&local->hw, true);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index e878b6a27651a..172173b2a9eb8 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2340,8 +2340,8 @@ static void ieee80211_flush_completed_scan(struct ieee80211_local *local,
 		 */
 		if (aborted)
 			set_bit(SCAN_ABORTED, &local->scanning);
-		ieee80211_queue_delayed_work(&local->hw, &local->scan_work, 0);
-		flush_delayed_work(&local->scan_work);
+		wiphy_delayed_work_queue(local->hw.wiphy, &local->scan_work, 0);
+		wiphy_delayed_work_flush(local->hw.wiphy, &local->scan_work);
 	}
 }
 



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux