This is a note to let you know that I've just added the patch titled
serial: Move uart_change_speed() earlier
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
serial-move-uart_change_speed-earlier.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 5c7f6fa9941aacb73ee2707226cfb043f6c0795f
Author: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
Date: Thu Mar 9 10:09:19 2023 +0200
serial: Move uart_change_speed() earlier
[ Upstream commit 8e90cf29aef77b59ed6a6f6466add2af79621f26 ]
Move uart_change_speed() earlier to get rid of its forward declaration.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230309080923.11778-5-ilpo.jarvinen@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Stable-dep-of: 8679328eb859 ("serial: Reduce spinlocked portion of uart_rs485_config()")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 2cc5c68c8689f..07e694c4f4827 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -48,8 +48,6 @@ static struct lock_class_key port_lock_key;
*/
#define RS485_MAX_RTS_DELAY 100 /* msecs */
-static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
- const struct ktermios *old_termios);
static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
static void uart_change_pm(struct uart_state *state,
enum uart_pm_state pm_state);
@@ -177,6 +175,52 @@ static void uart_port_dtr_rts(struct uart_port *uport, int raise)
uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
}
+/* Caller holds port mutex */
+static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
+ const struct ktermios *old_termios)
+{
+ struct uart_port *uport = uart_port_check(state);
+ struct ktermios *termios;
+ int hw_stopped;
+
+ /*
+ * If we have no tty, termios, or the port does not exist,
+ * then we can't set the parameters for this port.
+ */
+ if (!tty || uport->type == PORT_UNKNOWN)
+ return;
+
+ termios = &tty->termios;
+ uport->ops->set_termios(uport, termios, old_termios);
+
+ /*
+ * Set modem status enables based on termios cflag
+ */
+ spin_lock_irq(&uport->lock);
+ if (termios->c_cflag & CRTSCTS)
+ uport->status |= UPSTAT_CTS_ENABLE;
+ else
+ uport->status &= ~UPSTAT_CTS_ENABLE;
+
+ if (termios->c_cflag & CLOCAL)
+ uport->status &= ~UPSTAT_DCD_ENABLE;
+ else
+ uport->status |= UPSTAT_DCD_ENABLE;
+
+ /* reset sw-assisted CTS flow control based on (possibly) new mode */
+ hw_stopped = uport->hw_stopped;
+ uport->hw_stopped = uart_softcts_mode(uport) &&
+ !(uport->ops->get_mctrl(uport) & TIOCM_CTS);
+ if (uport->hw_stopped) {
+ if (!hw_stopped)
+ uport->ops->stop_tx(uport);
+ } else {
+ if (hw_stopped)
+ __uart_start(tty);
+ }
+ spin_unlock_irq(&uport->lock);
+}
+
/*
* Startup the port. This will be called once per open. All calls
* will be serialised by the per-port mutex.
@@ -485,52 +529,6 @@ uart_get_divisor(struct uart_port *port, unsigned int baud)
}
EXPORT_SYMBOL(uart_get_divisor);
-/* Caller holds port mutex */
-static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
- const struct ktermios *old_termios)
-{
- struct uart_port *uport = uart_port_check(state);
- struct ktermios *termios;
- int hw_stopped;
-
- /*
- * If we have no tty, termios, or the port does not exist,
- * then we can't set the parameters for this port.
- */
- if (!tty || uport->type == PORT_UNKNOWN)
- return;
-
- termios = &tty->termios;
- uport->ops->set_termios(uport, termios, old_termios);
-
- /*
- * Set modem status enables based on termios cflag
- */
- spin_lock_irq(&uport->lock);
- if (termios->c_cflag & CRTSCTS)
- uport->status |= UPSTAT_CTS_ENABLE;
- else
- uport->status &= ~UPSTAT_CTS_ENABLE;
-
- if (termios->c_cflag & CLOCAL)
- uport->status &= ~UPSTAT_DCD_ENABLE;
- else
- uport->status |= UPSTAT_DCD_ENABLE;
-
- /* reset sw-assisted CTS flow control based on (possibly) new mode */
- hw_stopped = uport->hw_stopped;
- uport->hw_stopped = uart_softcts_mode(uport) &&
- !(uport->ops->get_mctrl(uport) & TIOCM_CTS);
- if (uport->hw_stopped) {
- if (!hw_stopped)
- uport->ops->stop_tx(uport);
- } else {
- if (hw_stopped)
- __uart_start(tty);
- }
- spin_unlock_irq(&uport->lock);
-}
-
static int uart_put_char(struct tty_struct *tty, unsigned char c)
{
struct uart_state *state = tty->driver_data;
