This is a note to let you know that I've just added the patch titled
serial: 8250_port: Check IRQ data before use
to the 5.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
serial-8250_port-check-irq-data-before-use.patch
and it can be found in the queue-5.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From cce7fc8b29961b64fadb1ce398dc5ff32a79643b Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Date: Fri, 1 Sep 2023 01:25:55 +0300
Subject: serial: 8250_port: Check IRQ data before use
From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
commit cce7fc8b29961b64fadb1ce398dc5ff32a79643b upstream.
In case the leaf driver wants to use IRQ polling (irq = 0) and
IIR register shows that an interrupt happened in the 8250 hardware
the IRQ data can be NULL. In such a case we need to skip the wake
event as we came to this path from the timer interrupt and quite
likely system is already awake.
Without this fix we have got an Oops:
serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A
...
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:serial8250_handle_irq+0x7c/0x240
Call Trace:
? serial8250_handle_irq+0x7c/0x240
? __pfx_serial8250_timeout+0x10/0x10
Fixes: 0ba9e3a13c6a ("serial: 8250: Add missing wakeup event reporting")
Cc: stable <stable@xxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230831222555.614426-1-andriy.shevchenko@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_port.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1930,7 +1930,10 @@ int serial8250_handle_irq(struct uart_po
skip_rx = true;
if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) {
- if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
+ struct irq_data *d;
+
+ d = irq_get_irq_data(port->irq);
+ if (d && irqd_is_wakeup_set(d))
pm_wakeup_event(tport->tty->dev, 0);
if (!up->dma || handle_rx_dma(up, iir))
status = serial8250_rx_chars(up, status);
Patches currently in stable-queue which might be from andriy.shevchenko@xxxxxxxxxxxxxxx are
queue-5.15/i2c-mux-gpio-replace-custom-acpi_get_local_address.patch
queue-5.15/platform-x86-intel_scu_ipc-fail-ipc-send-if-still-bu.patch
queue-5.15/platform-x86-intel_scu_ipc-check-status-after-timeou.patch
queue-5.15/platform-x86-intel_scu_ipc-check-status-upon-timeout.patch
queue-5.15/platform-x86-intel_scu_ipc-don-t-override-scu-in-int.patch
queue-5.15/serial-8250_port-check-irq-data-before-use.patch
