This is a note to let you know that I've just added the patch titled
spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
spi-sun6i-fix-race-between-dma-rx-transfer-completio.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 0231204cc03815f499d68b7d3af970895038cb02
Author: Tobias Schramm <t.schramm@xxxxxxxxxxx>
Date: Sun Aug 27 17:25:58 2023 +0200
spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain
[ Upstream commit 1f11f4202caf5710204d334fe63392052783876d ]
Previously the transfer complete IRQ immediately drained to RX FIFO to
read any data remaining in FIFO to the RX buffer. This behaviour is
correct when dealing with SPI in interrupt mode. However in DMA mode the
transfer complete interrupt still fires as soon as all bytes to be
transferred have been stored in the FIFO. At that point data in the FIFO
still needs to be picked up by the DMA engine. Thus the drain procedure
and DMA engine end up racing to read from RX FIFO, corrupting any data
read. Additionally the RX buffer pointer is never adjusted according to
DMA progress in DMA mode, thus calling the RX FIFO drain procedure in DMA
mode is a bug.
Fix corruptions in DMA RX mode by draining RX FIFO only in interrupt mode.
Also wait for completion of RX DMA when in DMA mode before returning to
ensure all data has been copied to the supplied memory buffer.
Signed-off-by: Tobias Schramm <t.schramm@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230827152558.5368-3-t.schramm@xxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index 2bfe87873edb3..d79853ba7792a 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -95,6 +95,7 @@ struct sun6i_spi {
struct reset_control *rstc;
struct completion done;
+ struct completion dma_rx_done;
const u8 *tx_buf;
u8 *rx_buf;
@@ -189,6 +190,13 @@ static size_t sun6i_spi_max_transfer_size(struct spi_device *spi)
return SUN6I_MAX_XFER_SIZE - 1;
}
+static void sun6i_spi_dma_rx_cb(void *param)
+{
+ struct sun6i_spi *sspi = param;
+
+ complete(&sspi->dma_rx_done);
+}
+
static int sun6i_spi_prepare_dma(struct sun6i_spi *sspi,
struct spi_transfer *tfr)
{
@@ -213,6 +221,8 @@ static int sun6i_spi_prepare_dma(struct sun6i_spi *sspi,
DMA_PREP_INTERRUPT);
if (!rxdesc)
return -EINVAL;
+ rxdesc->callback_param = sspi;
+ rxdesc->callback = sun6i_spi_dma_rx_cb;
}
txdesc = NULL;
@@ -268,6 +278,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
return -EINVAL;
reinit_completion(&sspi->done);
+ reinit_completion(&sspi->dma_rx_done);
sspi->tx_buf = tfr->tx_buf;
sspi->rx_buf = tfr->rx_buf;
sspi->len = tfr->len;
@@ -426,6 +437,22 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
start = jiffies;
timeout = wait_for_completion_timeout(&sspi->done,
msecs_to_jiffies(tx_time));
+
+ if (!use_dma) {
+ sun6i_spi_drain_fifo(sspi);
+ } else {
+ if (timeout && rx_len) {
+ /*
+ * Even though RX on the peripheral side has finished
+ * RX DMA might still be in flight
+ */
+ timeout = wait_for_completion_timeout(&sspi->dma_rx_done,
+ timeout);
+ if (!timeout)
+ dev_warn(&master->dev, "RX DMA timeout\n");
+ }
+ }
+
end = jiffies;
if (!timeout) {
dev_warn(&master->dev,
@@ -453,7 +480,6 @@ static irqreturn_t sun6i_spi_handler(int irq, void *dev_id)
/* Transfer complete */
if (status & SUN6I_INT_CTL_TC) {
sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC);
- sun6i_spi_drain_fifo(sspi);
complete(&sspi->done);
return IRQ_HANDLED;
}
@@ -611,6 +637,7 @@ static int sun6i_spi_probe(struct platform_device *pdev)
}
init_completion(&sspi->done);
+ init_completion(&sspi->dma_rx_done);
sspi->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
if (IS_ERR(sspi->rstc)) {
