Patch "mmc: renesas_sdhi: probe into TMIO after SCC parameters have been setup" has been added to the 5.10-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    mmc: renesas_sdhi: probe into TMIO after SCC parameters have been setup

to the 5.10-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     mmc-renesas_sdhi-probe-into-tmio-after-scc-parameter.patch
and it can be found in the queue-5.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 41ed0718c3f22668a7a91aa11ab9a7b24475a84d
Author: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Date:   Tue Nov 10 15:20:56 2020 +0100

    mmc: renesas_sdhi: probe into TMIO after SCC parameters have been setup
    
    [ Upstream commit b161d87dfd3d9f3fb064a089a9e521d0e5d3e38f ]
    
    Setting up the SCC parameters does not need a probed TMIO device. But in
    the near future, probing the TMIO device needs the SCC parameters setup.
    So, fix the ordering.
    
    Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
    Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
    Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
    Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
    Link: https://lore.kernel.org/r/20201110142058.36393-3-wsa+renesas@xxxxxxxxxxxxxxxxxxxx
    Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
    Stable-dep-of: 74f45de394d9 ("mmc: renesas_sdhi: register irqs before registering controller")
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index a49b8fe2a0982..2cf7360d6cade 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -1070,10 +1070,6 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 			quirks->hs400_calib_table + 1);
 	}
 
-	ret = tmio_mmc_host_probe(host);
-	if (ret < 0)
-		goto edisclk;
-
 	/* Enable tuning iff we have an SCC and a supported mode */
 	if (of_data && of_data->scc_offset &&
 	    (host->mmc->caps & MMC_CAP_UHS_SDR104 ||
@@ -1105,6 +1101,10 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 		host->ops.hs400_complete = renesas_sdhi_hs400_complete;
 	}
 
+	ret = tmio_mmc_host_probe(host);
+	if (ret < 0)
+		goto edisclk;
+
 	num_irqs = platform_irq_count(pdev);
 	if (num_irqs < 0) {
 		ret = num_irqs;



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux