This is a note to let you know that I've just added the patch titled
scsi: qla2xxx: Fix erroneous link up failure
to the 5.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
scsi-qla2xxx-fix-erroneous-link-up-failure.patch
and it can be found in the queue-5.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 5b51f35d127e7bef55fa869d2465e2bca4636454 Mon Sep 17 00:00:00 2001
From: Quinn Tran <qutran@xxxxxxxxxxx>
Date: Fri, 14 Jul 2023 12:30:59 +0530
Subject: scsi: qla2xxx: Fix erroneous link up failure
From: Quinn Tran <qutran@xxxxxxxxxxx>
commit 5b51f35d127e7bef55fa869d2465e2bca4636454 upstream.
Link up failure occurred where driver failed to see certain events from FW
indicating link up (AEN 8011) and fabric login completion (AEN 8014).
Without these 2 events, driver would not proceed forward to scan the
fabric. The cause of this is due to delay in the receive of interrupt for
Mailbox 60 that causes qla to set the fw_started flag late. The late
setting of this flag causes other interrupts to be dropped. These dropped
interrupts happen to be the link up (AEN 8011) and fabric login completion
(AEN 8014).
Set fw_started flag early to prevent interrupts being dropped.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230714070104.40052-6-njavali@xxxxxxxxxxx
Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_init.c | 3 ++-
drivers/scsi/qla2xxx/qla_isr.c | 6 +++++-
2 files changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -4342,15 +4342,16 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
memcpy(ha->port_name, ha->init_cb->port_name, WWN_SIZE);
}
+ QLA_FW_STARTED(ha);
rval = qla2x00_init_firmware(vha, ha->init_cb_size);
next_check:
if (rval) {
+ QLA_FW_STOPPED(ha);
ql_log(ql_log_fatal, vha, 0x00d2,
"Init Firmware **** FAILED ****.\n");
} else {
ql_dbg(ql_dbg_init, vha, 0x00d3,
"Init Firmware -- success.\n");
- QLA_FW_STARTED(ha);
vha->u_ql2xexchoffld = vha->u_ql2xiniexchg = 0;
}
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -982,8 +982,12 @@ qla2x00_async_event(scsi_qla_host_t *vha
unsigned long flags;
fc_port_t *fcport = NULL;
- if (!vha->hw->flags.fw_started)
+ if (!vha->hw->flags.fw_started) {
+ ql_log(ql_log_warn, vha, 0x50ff,
+ "Dropping AEN - %04x %04x %04x %04x.\n",
+ mb[0], mb[1], mb[2], mb[3]);
return;
+ }
/* Setup to process RIO completion. */
handle_cnt = 0;
Patches currently in stable-queue which might be from qutran@xxxxxxxxxxx are
queue-5.10/scsi-qla2xxx-fix-deletion-race-condition.patch
queue-5.10/scsi-qla2xxx-fix-erroneous-link-up-failure.patch
queue-5.10/scsi-qla2xxx-flush-mailbox-commands-on-chip-reset.patch
queue-5.10/scsi-qla2xxx-fix-inconsistent-tmf-timeout.patch
queue-5.10/scsi-qla2xxx-turn-off-noisy-message-log.patch
