This is a note to let you know that I've just added the patch titled
clk: imx: imx8ulp: update SPLL2 type
to the 6.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
clk-imx-imx8ulp-update-spll2-type.patch
and it can be found in the queue-6.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit ba72b34a91e3610cdbb966ef4718f09583f63628
Author: Peng Fan <peng.fan@xxxxxxx>
Date: Sun Jun 25 20:33:40 2023 +0800
clk: imx: imx8ulp: update SPLL2 type
[ Upstream commit 7653a59be8af043adc4c09473975a860e6055ff9 ]
The SPLL2 on iMX8ULP is different with other frac PLLs, it can
support VCO from 650Mhz to 1Ghz. Following the changes to pllv4,
use the new type IMX_PLLV4_IMX8ULP_1GHZ.
Fixes: c43a801a5789 ("clk: imx: Add clock driver for imx8ulp")
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
Reviewed-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230625123340.4067536-2-peng.fan@xxxxxxxxxxx
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/clk/imx/clk-imx8ulp.c b/drivers/clk/imx/clk-imx8ulp.c
index e308c88cb801c..1b04e2fc78ad5 100644
--- a/drivers/clk/imx/clk-imx8ulp.c
+++ b/drivers/clk/imx/clk-imx8ulp.c
@@ -167,7 +167,7 @@ static int imx8ulp_clk_cgc1_init(struct platform_device *pdev)
clks[IMX8ULP_CLK_SPLL2_PRE_SEL] = imx_clk_hw_mux_flags("spll2_pre_sel", base + 0x510, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
clks[IMX8ULP_CLK_SPLL3_PRE_SEL] = imx_clk_hw_mux_flags("spll3_pre_sel", base + 0x610, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
- clks[IMX8ULP_CLK_SPLL2] = imx_clk_hw_pllv4(IMX_PLLV4_IMX8ULP, "spll2", "spll2_pre_sel", base + 0x500);
+ clks[IMX8ULP_CLK_SPLL2] = imx_clk_hw_pllv4(IMX_PLLV4_IMX8ULP_1GHZ, "spll2", "spll2_pre_sel", base + 0x500);
clks[IMX8ULP_CLK_SPLL3] = imx_clk_hw_pllv4(IMX_PLLV4_IMX8ULP, "spll3", "spll3_pre_sel", base + 0x600);
clks[IMX8ULP_CLK_SPLL3_VCODIV] = imx_clk_hw_divider("spll3_vcodiv", "spll3", base + 0x604, 0, 6);
