This is a note to let you know that I've just added the patch titled
arm64: dts: qcom: apq8016-sbc: Rename ov5640 enable-gpios to powerdown-gpios
to the 6.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dts-qcom-apq8016-sbc-rename-ov5640-enable-gpio.patch
and it can be found in the queue-6.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 2c6dbb19c7889da495ff69e270dfe6bbca1016fa
Author: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Date: Sat Aug 12 00:47:36 2023 +0100
arm64: dts: qcom: apq8016-sbc: Rename ov5640 enable-gpios to powerdown-gpios
[ Upstream commit 4facccb44a82129195878750eed8f9890091c1b8 ]
There are two control lines controlled by GPIO going into ov5640
- Reset
- Powerdown
The driver and yaml expect "reset-gpios" and "powerdown-gpios" there has
never been an "enable-gpios".
Fixes: 39e0ce6cd1bf ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230811234738.2859417-6-bryan.odonoghue@xxxxxxxxxx
Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 80a6526779849..fa92a870cfc40 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -276,7 +276,7 @@ camera_rear@3b {
compatible = "ovti,ov5640";
reg = <0x3b>;
- enable-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&camera_rear_default>;
