This is a note to let you know that I've just added the patch titled
phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328
to the 6.5-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
phy-rockchip-inno-hdmi-use-correct-vco_div_5-macro-o.patch
and it can be found in the queue-6.5 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit ce9d3c1bea11ab43a722566273725f7f6391eb7c
Author: Jonas Karlman <jonas@xxxxxxxxx>
Date: Thu Jun 15 17:10:17 2023 +0000
phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328
[ Upstream commit 644c06dfbd0da713f772abf0a8f8581ac78e6264 ]
inno_hdmi_phy_rk3328_clk_set_rate() is using the RK3228 macro
when configuring vco_div_5 on RK3328.
Fix this by using correct vco_div_5 macro for RK3328.
Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
Link: https://lore.kernel.org/r/20230615171005.2251032-2-jonas@xxxxxxxxx
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index 1e1563f5fffc4..f348e5347d817 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -790,8 +790,8 @@ static int inno_hdmi_phy_rk3328_clk_set_rate(struct clk_hw *hw,
RK3328_PRE_PLL_POWER_DOWN);
/* Configure pre-pll */
- inno_update_bits(inno, 0xa0, RK3228_PCLK_VCO_DIV_5_MASK,
- RK3228_PCLK_VCO_DIV_5(cfg->vco_div_5_en));
+ inno_update_bits(inno, 0xa0, RK3328_PCLK_VCO_DIV_5_MASK,
+ RK3328_PCLK_VCO_DIV_5(cfg->vco_div_5_en));
inno_write(inno, 0xa1, RK3328_PRE_PLL_PRE_DIV(cfg->prediv));
val = RK3328_SPREAD_SPECTRUM_MOD_DISABLE;
