This is a note to let you know that I've just added the patch titled
USB: serial: option: add FOXCONN T99W368/T99W373 product
to the 6.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-serial-option-add-foxconn-t99w368-t99w373-product.patch
and it can be found in the queue-6.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 4d9488b294e1f8353bbcadc4c7172a7f7490199b Mon Sep 17 00:00:00 2001
From: Slark Xiao <slark_xiao@xxxxxxx>
Date: Wed, 23 Aug 2023 15:57:51 +0800
Subject: USB: serial: option: add FOXCONN T99W368/T99W373 product
From: Slark Xiao <slark_xiao@xxxxxxx>
commit 4d9488b294e1f8353bbcadc4c7172a7f7490199b upstream.
The difference of T99W368 and T99W373 is the chip solution.
T99W368 is designed based on Qualcomm SDX65 and T99W373 is SDX62.
Test evidence as below:
T: Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e0f0 Rev=05.04
S: Manufacturer=FII
S: Product=OLYMPIC USB WWAN Adapter
S: SerialNumber=78ada8c4
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
T: Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e0ee Rev=05.04
S: Manufacturer=FII
S: Product=OLYMPIC USB WWAN Adapter
S: SerialNumber=78ada8d5
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
Both of them share the same port configuration:
0&1: MBIM, 2: Modem, 3:GNSS, 4:NMEA, 5:Diag
GNSS port don't use serial driver.
Signed-off-by: Slark Xiao <slark_xiao@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2235,6 +2235,10 @@ static const struct usb_device_id option
.driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff), /* Foxconn T99W265 MBIM */
.driver_info = RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff), /* Foxconn T99W368 MBIM */
+ .driver_info = RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff), /* Foxconn T99W373 MBIM */
+ .driver_info = RSVD(3) },
{ USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */
.driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
{ USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */
Patches currently in stable-queue which might be from slark_xiao@xxxxxxx are
queue-6.4/usb-serial-option-add-foxconn-t99w368-t99w373-product.patch
