This is a note to let you know that I've just added the patch titled
scsi: qla2xxx: Wait for io return on terminate rport
to the 4.19-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
scsi-qla2xxx-wait-for-io-return-on-terminate-rport.patch
and it can be found in the queue-4.19 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From fc0cba0c7be8261a1625098bd1d695077ec621c9 Mon Sep 17 00:00:00 2001
From: Quinn Tran <qutran@xxxxxxxxxxx>
Date: Fri, 28 Apr 2023 00:53:38 -0700
Subject: scsi: qla2xxx: Wait for io return on terminate rport
From: Quinn Tran <qutran@xxxxxxxxxxx>
commit fc0cba0c7be8261a1625098bd1d695077ec621c9 upstream.
System crash due to use after free.
Current code allows terminate_rport_io to exit before making
sure all IOs has returned. For FCP-2 device, IO's can hang
on in HW because driver has not tear down the session in FW at
first sign of cable pull. When dev_loss_tmo timer pops,
terminate_rport_io is called and upper layer is about to
free various resources. Terminate_rport_io trigger qla to do
the final cleanup, but the cleanup might not be fast enough where it
leave qla still holding on to the same resource.
Wait for IO's to return to upper layer before resources are freed.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230428075339.32551-7-njavali@xxxxxxxxxxx
Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_attr.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1800,6 +1800,7 @@ static void
qla2x00_terminate_rport_io(struct fc_rport *rport)
{
fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+ scsi_qla_host_t *vha;
if (!fcport)
return;
@@ -1809,9 +1810,12 @@ qla2x00_terminate_rport_io(struct fc_rpo
if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))
return;
+ vha = fcport->vha;
if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) {
qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16);
+ qla2x00_eh_wait_for_pending_commands(fcport->vha, fcport->d_id.b24,
+ 0, WAIT_TARGET);
return;
}
/*
@@ -1826,6 +1830,15 @@ qla2x00_terminate_rport_io(struct fc_rpo
else
qla2x00_port_logout(fcport->vha, fcport);
}
+
+ /* check for any straggling io left behind */
+ if (qla2x00_eh_wait_for_pending_commands(fcport->vha, fcport->d_id.b24, 0, WAIT_TARGET)) {
+ ql_log(ql_log_warn, vha, 0x300b,
+ "IO not return. Resetting. \n");
+ set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ qla2xxx_wake_dpc(vha);
+ qla2x00_wait_for_chip_reset(vha);
+ }
}
static int
Patches currently in stable-queue which might be from qutran@xxxxxxxxxxx are
queue-4.19/scsi-qla2xxx-wait-for-io-return-on-terminate-rport.patch
