Patch "mmc: sdhci: fix DMA configure compatibility issue when 64bit DMA mode is used." has been added to the 6.1-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    mmc: sdhci: fix DMA configure compatibility issue when 64bit DMA mode is used.

to the 6.1-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     mmc-sdhci-fix-dma-configure-compatibility-issue-when-64bit-dma-mode-is-used.patch
and it can be found in the queue-6.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 20dbd07ef0a8bc29eb03d6a95258ac8934cbe52d Mon Sep 17 00:00:00 2001
From: Chevron Li <chevron.li@xxxxxxxxxxxxxx>
Date: Tue, 23 May 2023 19:11:14 +0800
Subject: mmc: sdhci: fix DMA configure compatibility issue when 64bit DMA mode is used.

From: Chevron Li <chevron.li@xxxxxxxxxxxxxx>

commit 20dbd07ef0a8bc29eb03d6a95258ac8934cbe52d upstream.

Bayhub SD host has hardware limitation:
1.The upper 32bit address is inhibited to be written at SD Host Register
  [03E][13]=0 (32bits addressing) mode, is admitted to be written only at
  SD Host Register [03E][13]=1 (64bits addressing) mode.
2.Because of above item#1, need to configure SD Host Register [03E][13] to
  1(64bits addressing mode) before set 64bit ADMA system address's higher
  32bits SD Host Register [05F~05C] if 64 bits addressing mode is used.

The hardware limitation is reasonable for below reasons:
1.Normal flow should set DMA working mode first, then do
  DMA-transfer-related configuration, such as system address.
2.The hardware limitation may avoid the software to configure wrong higher
  32bit address at 32bits addressing mode although it is redundant.

The change that set 32bits/64bits addressing mode before set ADMA address,
  has no side-effect to other host IPs for below reason:
The setting order is reasonable and standard: DMA Mode setting first and
  then DMA address setting. It meets all DMA setting sequence.

Signed-off-by: Chevron Li <chevron.li@xxxxxxxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20230523111114.18124-1-chevron_li@xxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/mmc/host/sdhci.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1181,6 +1181,8 @@ static void sdhci_prepare_data(struct sd
 		}
 	}
 
+	sdhci_config_dma(host);
+
 	if (host->flags & SDHCI_REQ_USE_DMA) {
 		int sg_cnt = sdhci_pre_dma_transfer(host, data, COOKIE_MAPPED);
 
@@ -1200,8 +1202,6 @@ static void sdhci_prepare_data(struct sd
 		}
 	}
 
-	sdhci_config_dma(host);
-
 	if (!(host->flags & SDHCI_REQ_USE_DMA)) {
 		int flags;
 


Patches currently in stable-queue which might be from chevron.li@xxxxxxxxxxxxxx are

queue-6.1/mmc-sdhci-fix-dma-configure-compatibility-issue-when-64bit-dma-mode-is-used.patch



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux