This is a note to let you know that I've just added the patch titled
clk: qcom: ipq6018: fix networking resets
to the 5.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
clk-qcom-ipq6018-fix-networking-resets.patch
and it can be found in the queue-5.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 30c3209f3b0dcecdbf0f87eebc3da1f038037201
Author: Robert Marko <robimarko@xxxxxxxxx>
Date: Fri May 26 21:08:55 2023 +0200
clk: qcom: ipq6018: fix networking resets
[ Upstream commit 349b5bed539b491b7894a5186a895751fd8ba6c7 ]
Networking resets in IPQ6018 all use bitmask as they require multiple
bits to be set and cleared instead of a single bit.
So, current networking resets have the same register and bit 0 set which
is clearly incorrect.
Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230526190855.2941291-2-robimarko@xxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/clk/qcom/gcc-ipq6018.c b/drivers/clk/qcom/gcc-ipq6018.c
index 5c5d1b04ea7af..cde62a11f5736 100644
--- a/drivers/clk/qcom/gcc-ipq6018.c
+++ b/drivers/clk/qcom/gcc-ipq6018.c
@@ -4517,24 +4517,24 @@ static const struct qcom_reset_map gcc_ipq6018_resets[] = {
[GCC_PCIE0_AHB_ARES] = { 0x75040, 5 },
[GCC_PCIE0_AXI_MASTER_STICKY_ARES] = { 0x75040, 6 },
[GCC_PCIE0_AXI_SLAVE_STICKY_ARES] = { 0x75040, 7 },
- [GCC_PPE_FULL_RESET] = { 0x68014, 0 },
- [GCC_UNIPHY0_SOFT_RESET] = { 0x56004, 0 },
+ [GCC_PPE_FULL_RESET] = { .reg = 0x68014, .bitmask = 0xf0000 },
+ [GCC_UNIPHY0_SOFT_RESET] = { .reg = 0x56004, .bitmask = 0x3ff2 },
[GCC_UNIPHY0_XPCS_RESET] = { 0x56004, 2 },
- [GCC_UNIPHY1_SOFT_RESET] = { 0x56104, 0 },
+ [GCC_UNIPHY1_SOFT_RESET] = { .reg = 0x56104, .bitmask = 0x32 },
[GCC_UNIPHY1_XPCS_RESET] = { 0x56104, 2 },
- [GCC_EDMA_HW_RESET] = { 0x68014, 0 },
- [GCC_NSSPORT1_RESET] = { 0x68014, 0 },
- [GCC_NSSPORT2_RESET] = { 0x68014, 0 },
- [GCC_NSSPORT3_RESET] = { 0x68014, 0 },
- [GCC_NSSPORT4_RESET] = { 0x68014, 0 },
- [GCC_NSSPORT5_RESET] = { 0x68014, 0 },
- [GCC_UNIPHY0_PORT1_ARES] = { 0x56004, 0 },
- [GCC_UNIPHY0_PORT2_ARES] = { 0x56004, 0 },
- [GCC_UNIPHY0_PORT3_ARES] = { 0x56004, 0 },
- [GCC_UNIPHY0_PORT4_ARES] = { 0x56004, 0 },
- [GCC_UNIPHY0_PORT5_ARES] = { 0x56004, 0 },
- [GCC_UNIPHY0_PORT_4_5_RESET] = { 0x56004, 0 },
- [GCC_UNIPHY0_PORT_4_RESET] = { 0x56004, 0 },
+ [GCC_EDMA_HW_RESET] = { .reg = 0x68014, .bitmask = 0x300000 },
+ [GCC_NSSPORT1_RESET] = { .reg = 0x68014, .bitmask = 0x1000003 },
+ [GCC_NSSPORT2_RESET] = { .reg = 0x68014, .bitmask = 0x200000c },
+ [GCC_NSSPORT3_RESET] = { .reg = 0x68014, .bitmask = 0x4000030 },
+ [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = 0x8000300 },
+ [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = 0x10000c00 },
+ [GCC_UNIPHY0_PORT1_ARES] = { .reg = 0x56004, .bitmask = 0x30 },
+ [GCC_UNIPHY0_PORT2_ARES] = { .reg = 0x56004, .bitmask = 0xc0 },
+ [GCC_UNIPHY0_PORT3_ARES] = { .reg = 0x56004, .bitmask = 0x300 },
+ [GCC_UNIPHY0_PORT4_ARES] = { .reg = 0x56004, .bitmask = 0xc00 },
+ [GCC_UNIPHY0_PORT5_ARES] = { .reg = 0x56004, .bitmask = 0x3000 },
+ [GCC_UNIPHY0_PORT_4_5_RESET] = { .reg = 0x56004, .bitmask = 0x3c02 },
+ [GCC_UNIPHY0_PORT_4_RESET] = { .reg = 0x56004, .bitmask = 0xc02 },
[GCC_LPASS_BCR] = {0x1F000, 0},
[GCC_UBI32_TBU_BCR] = {0x65000, 0},
[GCC_LPASS_TBU_BCR] = {0x6C000, 0},
