This is a note to let you know that I've just added the patch titled
powerpc: dts: turris1x.dts: Fix PCIe MEM size for pci2 node
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
powerpc-dts-turris1x.dts-fix-pcie-mem-size-for-pci2-.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 5bef14c3b74185c168ce38b8ee33fb07b266292e
Author: Pali Rohár <pali@xxxxxxxxxx>
Date: Fri May 5 19:28:18 2023 +0200
powerpc: dts: turris1x.dts: Fix PCIe MEM size for pci2 node
[ Upstream commit abaa02fc944f2f9f2c2e1925ddaceaf35c48528c ]
Freescale PCIe controllers on their PCIe Root Ports do not have any
mappable PCI BAR allocate from PCIe MEM.
Information about 1MB window on BAR0 of PCIe Root Port was misleading
because Freescale PCIe controllers have at BAR0 position different register
PEXCSRBAR, and kernel correctly skipts BAR0 for these Freescale PCIe Root
Ports.
So update comment about P2020 PCIe Root Port and decrease PCIe MEM size
required for PCIe controller (pci2 node) on which is on-board xHCI
controller.
lspci confirms that on P2020 PCIe Root Port is no PCI BAR and /proc/iomem
sees that only c0000000-c000ffff and c0010000-c0011fff ranges are used.
Fixes: 54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Link: https://msgid.link/20230505172818.18416-1-pali@xxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/powerpc/boot/dts/turris1x.dts b/arch/powerpc/boot/dts/turris1x.dts
index e9cda34a140e0..9377055d5565c 100644
--- a/arch/powerpc/boot/dts/turris1x.dts
+++ b/arch/powerpc/boot/dts/turris1x.dts
@@ -453,12 +453,12 @@ pci2: pcie@ffe08000 {
* channel 1 (but only USB 2.0 subset) to USB 2.0 pins on mPCIe
* slot 1 (CN5), channels 2 and 3 to connector P600.
*
- * P2020 PCIe Root Port uses 1MB of PCIe MEM and xHCI controller
+ * P2020 PCIe Root Port does not use PCIe MEM and xHCI controller
* uses 64kB + 8kB of PCIe MEM. No PCIe IO is used or required.
- * So allocate 2MB of PCIe MEM for this PCIe bus.
+ * So allocate 128kB of PCIe MEM for this PCIe bus.
*/
reg = <0 0xffe08000 0 0x1000>;
- ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00200000>, /* MEM */
+ ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00020000>, /* MEM */
<0x01000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; /* IO */
pcie@0 {
