This is a note to let you know that I've just added the patch titled
arm64: dts: qcom: apq8016-sbc: Fix regulator constraints
to the 5.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dts-qcom-apq8016-sbc-fix-regulator-constraints.patch
and it can be found in the queue-5.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 9759957da18b3a0be1450490ef868309e467a50e
Author: Stephan Gerhold <stephan@xxxxxxxxxxx>
Date: Wed May 17 20:48:40 2023 +0200
arm64: dts: qcom: apq8016-sbc: Fix regulator constraints
[ Upstream commit e27654df20d77ad7549a3cf6739ebaa3aa59a088 ]
For some reason DB410c has completely bogus regulator constraints that
actually just correspond to the programmable voltages which are already
provided by the regulator driver. Some of them are not just outside the
recommended operating conditions of the APQ8016E SoC but even exceed
the absolute maximum ratings, potentially risking permanent device
damage.
In practice it's not quite as dangerous thanks to the RPM firmware:
It turns out that it has its own voltage constraints and silently
clamps all regulator requests. For example, requesting 3.3V for L5
(allowed by the current regulator constraints!) still results in 1.8V
being programmed in the actual regulator hardware.
Experimentation with various voltages shows that the internal RPM
voltage constraints roughly correspond to the safe "specified range"
in the PM8916 Device Specification (rather than the "programmable
range" used inside apq8016-sbc.dtsi right now).
Combine those together with some fixed voltages used in the old
msm-3.10 device tree from Qualcomm to give DB410c some actually valid
voltage constraints.
Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Fixes: 4c7d53d16d77 ("arm64: dts: apq8016-sbc: add regulators support")
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-1-54d4960a05fc@xxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index a5320d6d30e7b..528138af24f09 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -440,21 +440,21 @@ &smd_rpm_regulators {
vdd_l7-supply = <&pm8916_s4>;
s3 {
- regulator-min-microvolt = <375000>;
- regulator-max-microvolt = <1562000>;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
};
s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2150000>;
regulator-always-on;
regulator-boot-on;
};
l1 {
- regulator-min-microvolt = <375000>;
- regulator-max-microvolt = <1525000>;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
};
l2 {
@@ -463,13 +463,13 @@ l2 {
};
l4 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
};
l5 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
l6 {
@@ -478,45 +478,45 @@ l6 {
};
l7 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
l8 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
};
l9 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
l10 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
};
l11 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
l12 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
};
l13 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
};
l14 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
};
/**
@@ -524,14 +524,14 @@ l14 {
* for mezzanine boards
*/
l15 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-always-on;
};
l16 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
};
l17 {
@@ -540,8 +540,8 @@ l17 {
};
l18 {
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3337000>;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
};
};
