This is a note to let you know that I've just added the patch titled
ASoC: es8316: Do not set rate constraints for unsupported MCLKs
to the 5.15-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
asoc-es8316-do-not-set-rate-constraints-for-unsuppor.patch
and it can be found in the queue-5.15 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit d5bbb44e7d89b36feed6f880ec73360131779946
Author: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
Date: Tue May 30 21:11:39 2023 +0300
ASoC: es8316: Do not set rate constraints for unsupported MCLKs
[ Upstream commit 60413129ee2b38a80347489270af7f6e1c1de4d0 ]
When using the codec through the generic audio graph card, there are at
least two calls of es8316_set_dai_sysclk(), with the effect of limiting
the allowed sample rates according to the MCLK/LRCK ratios supported by
the codec:
1. During audio card setup, to set the initial MCLK - see
asoc_simple_init_dai().
2. Before opening a stream, to update MCLK, according to the stream
sample rate and the multiplication factor - see
asoc_simple_hw_params().
In some cases the initial MCLK might be set to a frequency that doesn't
match any of the supported ratios, e.g. 12287999 instead of 12288000,
which is only 1 Hz below the supported clock, as that is what the
hardware reports. This creates an empty list of rate constraints, which
is further passed to snd_pcm_hw_constraint_list() via
es8316_pcm_startup(), and causes the following error on the very first
access of the sound card:
$ speaker-test -D hw:Analog,0 -F S16_LE -c 2 -t wav
Broken configuration for playback: no configurations available: Invalid argument
Setting of hwparams failed: Invalid argument
Note that all subsequent retries succeed thanks to the updated MCLK set
at point 2 above, which uses a computed frequency value instead of a
reading from the hardware registers. Normally this would have mitigated
the issue, but es8316_pcm_startup() executes before the 2nd call to
es8316_set_dai_sysclk(), hence it cannot make use of the updated
constraints.
Since es8316_pcm_hw_params() performs anyway a final validation of MCLK
against the stream sample rate and the supported MCLK/LRCK ratios, fix
the issue by ensuring that sysclk_constraints list is only set when at
least one supported sample rate is autodetected by the codec.
Fixes: b8b88b70875a ("ASoC: add es8316 codec driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230530181140.483936-3-cristian.ciocaltea@xxxxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c
index 673aac91d717e..b36ccfc54cd69 100644
--- a/sound/soc/codecs/es8316.c
+++ b/sound/soc/codecs/es8316.c
@@ -369,13 +369,11 @@ static int es8316_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int count = 0;
es8316->sysclk = freq;
+ es8316->sysclk_constraints.list = NULL;
+ es8316->sysclk_constraints.count = 0;
- if (freq == 0) {
- es8316->sysclk_constraints.list = NULL;
- es8316->sysclk_constraints.count = 0;
-
+ if (freq == 0)
return 0;
- }
ret = clk_set_rate(es8316->mclk, freq);
if (ret)
@@ -391,8 +389,10 @@ static int es8316_set_dai_sysclk(struct snd_soc_dai *codec_dai,
es8316->allowed_rates[count++] = freq / ratio;
}
- es8316->sysclk_constraints.list = es8316->allowed_rates;
- es8316->sysclk_constraints.count = count;
+ if (count) {
+ es8316->sysclk_constraints.list = es8316->allowed_rates;
+ es8316->sysclk_constraints.count = count;
+ }
return 0;
}
