Patch "arm64: dts: qcom: db820c: Move blsp1_uart2 pin states to msm8996.dtsi" has been added to the 5.15-stable tree

[Sasha Levin <sashal@xxxxxxxxxx>]

This is a note to let you know that I've just added the patch titled

    arm64: dts: qcom: db820c: Move blsp1_uart2 pin states to msm8996.dtsi

to the 5.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm64-dts-qcom-db820c-move-blsp1_uart2-pin-states-to.patch
and it can be found in the queue-5.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit d46d67829db50913ca039411e8edf3fe4e7b204e
Author: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
Date:   Wed Sep 1 19:33:24 2021 +0000

    arm64: dts: qcom: db820c: Move blsp1_uart2 pin states to msm8996.dtsi
    
    [ Upstream commit c57b4247faaf6d17a319c91d5eb736c3bc65aca2 ]
    
    Move blsp1_uart2_default and blsp1_uart2_sleep to the SoC device tree to
    avoid duplicating them in other device trees.
    
    Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
    Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
    Link: https://lore.kernel.org/r/20210901193214.250375-2-y.oudjana@xxxxxxxxxxxxxx
    Stable-dep-of: e27654df20d7 ("arm64: dts: qcom: apq8016-sbc: Fix regulator constraints")
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 51e17094d7b18..eca428ab2517a 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -148,9 +148,6 @@ &blsp1_spi1 {
 &blsp1_uart2 {
 	label = "BT-UART";
 	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp1_uart2_default>;
-	pinctrl-1 = <&blsp1_uart2_sleep>;
 
 	bluetooth {
 		compatible = "qcom,qca6174-bt";
@@ -437,32 +434,6 @@ config {
 		};
 	};
 
-	blsp1_uart2_default: blsp1_uart2_default {
-		mux {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			function = "blsp_uart2";
-		};
-
-		config {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	blsp1_uart2_sleep: blsp1_uart2_sleep {
-		mux {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
 	hdmi_hpd_active: hdmi_hpd_active {
 		mux {
 			pins = "gpio34";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 893c241f72030..ec3ef14048cc0 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1228,6 +1228,20 @@ wake {
 				};
 			};
 
+			blsp1_uart2_default: blsp1-uart2-default {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "blsp_uart2";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			blsp1_i2c3_default: blsp1-i2c2-default {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c3";
@@ -2724,6 +2738,9 @@ blsp1_uart2: serial@7570000 {
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
 			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
 			dma-names = "tx", "rx";
 			status = "disabled";