Patch "perf/arm-cmn: Fix DTC reset" has been added to the 5.15-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    perf/arm-cmn: Fix DTC reset

to the 5.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     perf-arm-cmn-fix-dtc-reset.patch
and it can be found in the queue-5.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 0ff3808431ba1e3bcacdbb571d7347b162c63491
Author: Robin Murphy <robin.murphy@xxxxxxx>
Date:   Wed May 24 17:44:32 2023 +0100

    perf/arm-cmn: Fix DTC reset
    
    [ Upstream commit 71746c995cac92fcf6a65661b51211cf2009d7f0 ]
    
    It turns out that my naive DTC reset logic fails to work as intended,
    since, after checking with the hardware designers, the PMU actually
    needs to be fully enabled in order to correctly clear any pending
    overflows. Therefore, invert the sequence to start with turning on both
    enables so that we can reliably get the DTCs into a known state, then
    moving to our normal counters-stopped state from there. Since all the
    DTM counters have already been unpaired during the initial discovery
    pass, we just need to additionally reset the cycle counters to ensure
    that no other unexpected overflows occur during this period.
    
    Fixes: 0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
    Reported-by: Geoff Blake <blakgeof@xxxxxxxxxx>
    Signed-off-by: Robin Murphy <robin.murphy@xxxxxxx>
    Link: https://lore.kernel.org/r/0ea4559261ea394f827c9aee5168c77a60aaee03.1684946389.git.robin.murphy@xxxxxxx
    Signed-off-by: Will Deacon <will@xxxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/perf/arm-cmn.c b/drivers/perf/arm-cmn.c
index 400eb7f579dce..40945343c4cc1 100644
--- a/drivers/perf/arm-cmn.c
+++ b/drivers/perf/arm-cmn.c
@@ -1254,9 +1254,10 @@ static int arm_cmn_init_dtc(struct arm_cmn *cmn, struct arm_cmn_node *dn, int id
 	if (dtc->irq < 0)
 		return dtc->irq;
 
-	writel_relaxed(0, dtc->base + CMN_DT_PMCR);
+	writel_relaxed(CMN_DT_DTC_CTL_DT_EN, dtc->base + CMN_DT_DTC_CTL);
+	writel_relaxed(CMN_DT_PMCR_PMU_EN | CMN_DT_PMCR_OVFL_INTR_EN, dtc->base + CMN_DT_PMCR);
+	writeq_relaxed(0, dtc->base + CMN_DT_PMCCNTR);
 	writel_relaxed(0x1ff, dtc->base + CMN_DT_PMOVSR_CLR);
-	writel_relaxed(CMN_DT_PMCR_OVFL_INTR_EN, dtc->base + CMN_DT_PMCR);
 
 	/* We do at least know that a DTC's XP must be in that DTC's domain */
 	xp = arm_cmn_node_to_xp(dn);
@@ -1303,7 +1304,7 @@ static int arm_cmn_init_dtcs(struct arm_cmn *cmn)
 			dn->type = CMN_TYPE_RNI;
 	}
 
-	writel_relaxed(CMN_DT_DTC_CTL_DT_EN, cmn->dtc[0].base + CMN_DT_DTC_CTL);
+	arm_cmn_set_state(cmn, CMN_STATE_DISABLED);
 
 	return 0;
 }



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux