This is a note to let you know that I've just added the patch titled
MIPS: DTS: CI20: Fix ACT8600 regulator node names
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mips-dts-ci20-fix-act8600-regulator-node-names.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 22800b93383156a4c30e421edc2bce1df81ab8c7
Author: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Date: Sun Jun 4 16:56:35 2023 +0200
MIPS: DTS: CI20: Fix ACT8600 regulator node names
[ Upstream commit 08384e80a70fb1942510ab5f0ce27bad134e634e ]
The Device Tree was using invalid node names for the ACT8600 regulators.
To be fair, it is not the original committer's fault, as the
documentation did gives invalid names as well.
In theory, the fix should have been to modify the driver to accept the
alternative names. However, even though the act8865 driver spits
warnings, the kernel seemed to work fine with what is currently
supported upstream. For that reason, I think it is okay to just update
the DTS.
I removed the "regulator-name" too, since they really didn't bring any
information. The node names are enough.
Fixes: 73f2b940474d ("MIPS: CI20: DTS: Add I2C nodes")
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Signed-off-by: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 8f21d2304737c..994c7ebfddc80 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -237,59 +237,49 @@ &i2c0 {
act8600: act8600@5a {
compatible = "active-semi,act8600";
reg = <0x5a>;
- status = "okay";
regulators {
- vddcore: SUDCDC1 {
- regulator-name = "DCDC_REG1";
+ vddcore: DCDC1 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
- vddmem: SUDCDC2 {
- regulator-name = "DCDC_REG2";
+ vddmem: DCDC2 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
- vcc_33: SUDCDC3 {
- regulator-name = "DCDC_REG3";
+ vcc_33: DCDC3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- vcc_50: SUDCDC4 {
- regulator-name = "SUDCDC_REG4";
+ vcc_50: SUDCDC_REG4 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
- vcc_25: LDO_REG5 {
- regulator-name = "LDO_REG5";
+ vcc_25: LDO5 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
- wifi_io: LDO_REG6 {
- regulator-name = "LDO_REG6";
+ wifi_io: LDO6 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
- vcc_28: LDO_REG7 {
- regulator-name = "LDO_REG7";
+ cim_io_28: LDO7 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
- vcc_15: LDO_REG8 {
- regulator-name = "LDO_REG8";
+ cim_io_15: LDO8 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
vrtc_18: LDO_REG9 {
- regulator-name = "LDO_REG9";
/* Despite the datasheet stating 3.3V
* for REG9 and the driver expecting that,
* REG9 outputs 1.8V.
@@ -303,7 +293,6 @@ vrtc_18: LDO_REG9 {
regulator-always-on;
};
vcc_11: LDO_REG10 {
- regulator-name = "LDO_REG10";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
