This is a note to let you know that I've just added the patch titled
drm/msm/dsi: don't allow enabling 14nm VCO with unprogrammed rate
to the 6.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drm-msm-dsi-don-t-allow-enabling-14nm-vco-with-unpro.patch
and it can be found in the queue-6.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 4ed7f162d7bf611d540bb9fc107afb9f9493b099
Author: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Date: Mon May 1 04:12:57 2023 +0300
drm/msm/dsi: don't allow enabling 14nm VCO with unprogrammed rate
[ Upstream commit 1e0a97f84d73ea1182740f62069690c7f3271abb ]
If the dispcc uses CLK_OPS_PARENT_ENABLE (e.g. on QCM2290), CCF can try
enabling VCO before the rate has been programmed. This can cause clock
lockups and/or other boot issues. Program the VCO to the minimal PLL
rate if the read rate is 0 Hz.
Cc: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
Reported-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Fixes: f079f6d999cb ("drm/msm/dsi: Add PHY/PLL for 8x96")
Patchwork: https://patchwork.freedesktop.org/patch/534813/
Link: https://lore.kernel.org/r/20230501011257.3460103-1-dmitry.baryshkov@xxxxxxxxxx
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
index 9f488adea7f54..3ce45b023e637 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -539,6 +539,9 @@ static int dsi_pll_14nm_vco_prepare(struct clk_hw *hw)
if (unlikely(pll_14nm->phy->pll_on))
return 0;
+ if (dsi_pll_14nm_vco_recalc_rate(hw, VCO_REF_CLK_RATE) == 0)
+ dsi_pll_14nm_vco_set_rate(hw, pll_14nm->phy->cfg->min_pll_rate, VCO_REF_CLK_RATE);
+
dsi_phy_write(base + REG_DSI_14nm_PHY_PLL_VREF_CFG1, 0x10);
dsi_phy_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 1);
