This is a note to let you know that I've just added the patch titled arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts to the 6.3-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-imx8-ss-dma-assign-default-clock-rate-for-.patch and it can be found in the queue-6.3 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit d2f4758e10e5c06d897cb0334b99ff2dc05db1dc Author: Shenwei Wang <shenwei.wang@xxxxxxx> Date: Fri May 26 10:38:54 2023 -0500 arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts [ Upstream commit ca50d7765587fe0a8351a6e8d9742cfd4811d925 ] Add the assigned-clocks and assigned-clock-rates properties for the LPUARTx nodes. Without these properties, the default clock rate used would be 0, which can cause the UART ports to fail when open. Fixes: 35f4e9d7530f ("arm64: dts: imx8: split adma ss into dma and audio ss") Signed-off-by: Shenwei Wang <shenwei.wang@xxxxxxx> Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index a943a1e2797f4..21345ae14eb25 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -90,6 +90,8 @@ lpuart0: serial@5a060000 { clocks = <&uart0_lpcg IMX_LPCG_CLK_4>, <&uart0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "baud"; + assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_0>; status = "disabled"; }; @@ -100,6 +102,8 @@ lpuart1: serial@5a070000 { clocks = <&uart1_lpcg IMX_LPCG_CLK_4>, <&uart1_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "baud"; + assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_1>; status = "disabled"; }; @@ -110,6 +114,8 @@ lpuart2: serial@5a080000 { clocks = <&uart2_lpcg IMX_LPCG_CLK_4>, <&uart2_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "baud"; + assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_2>; status = "disabled"; }; @@ -120,6 +126,8 @@ lpuart3: serial@5a090000 { clocks = <&uart3_lpcg IMX_LPCG_CLK_4>, <&uart3_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "baud"; + assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_3>; status = "disabled"; };