This is a note to let you know that I've just added the patch titled
net: enetc: correct the statistics of rx bytes
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-enetc-correct-the-statistics-of-rx-bytes.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 69e3698605a17fedfcb99ad88a9b4103100ffed3
Author: Wei Fang <wei.fang@xxxxxxx>
Date: Fri Jun 2 17:46:58 2023 +0800
net: enetc: correct the statistics of rx bytes
[ Upstream commit 7190d0ff0e17690a9b1279d84a06473600ba2060 ]
The rx_bytes of struct net_device_stats should count the length of
ethernet frames excluding the FCS. However, there are two problems
with the rx_bytes statistics of the current enetc driver. one is
that the length of VLAN header is not counted if the VLAN extraction
feature is enabled. The other is that the length of L2 header is not
counted, because eth_type_trans() is invoked before updating rx_bytes
which will subtract the length of L2 header from skb->len.
BTW, the rx_bytes statistics of XDP path also have similar problem,
I will fix it in another patch.
Fixes: a800abd3ecb9 ("net: enetc: move skb creation into enetc_build_skb")
Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
Reviewed-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index e96449eedfb54..df7747e49bb84 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -1209,7 +1209,13 @@ static int enetc_clean_rx_ring(struct enetc_bdr *rx_ring,
if (!skb)
break;
- rx_byte_cnt += skb->len;
+ /* When set, the outer VLAN header is extracted and reported
+ * in the receive buffer descriptor. So rx_byte_cnt should
+ * add the length of the extracted VLAN header.
+ */
+ if (bd_status & ENETC_RXBD_FLAG_VLAN)
+ rx_byte_cnt += VLAN_HLEN;
+ rx_byte_cnt += skb->len + ETH_HLEN;
rx_frm_cnt++;
napi_gro_receive(napi, skb);
