This is a note to let you know that I've just added the patch titled
gpio-f7188x: fix chip name and pin count on Nuvoton chip
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
gpio-f7188x-fix-chip-name-and-pin-count-on-nuvoton-c.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 9a125be940383e0c3453bff0d1ded868ddb199b2
Author: Henning Schild <henning.schild@xxxxxxxxxxx>
Date: Thu Apr 27 17:20:55 2023 +0200
gpio-f7188x: fix chip name and pin count on Nuvoton chip
[ Upstream commit 3002b8642f016d7fe3ff56240dacea1075f6b877 ]
In fact the device with chip id 0xD283 is called NCT6126D, and that is
the chip id the Nuvoton code was written for. Correct that name to avoid
confusion, because a NCT6116D in fact exists as well but has another
chip id, and is currently not supported.
The look at the spec also revealed that GPIO group7 in fact has 8 pins,
so correct the pin count in that group as well.
Fixes: d0918a84aff0 ("gpio-f7188x: Add GPIO support for Nuvoton NCT6116")
Reported-by: Xing Tong Wu <xingtong.wu@xxxxxxxxxxx>
Signed-off-by: Henning Schild <henning.schild@xxxxxxxxxxx>
Acked-by: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e3af86f06c630..3e8e5f4ffa59f 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -882,7 +882,7 @@ config GPIO_F7188X
help
This option enables support for GPIOs found on Fintek Super-I/O
chips F71869, F71869A, F71882FG, F71889F and F81866.
- As well as Nuvoton Super-I/O chip NCT6116D.
+ As well as Nuvoton Super-I/O chip NCT6126D.
To compile this driver as a module, choose M here: the module will
be called f7188x-gpio.
diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c
index 9effa7769bef5..f54ca5a1775ea 100644
--- a/drivers/gpio/gpio-f7188x.c
+++ b/drivers/gpio/gpio-f7188x.c
@@ -48,7 +48,7 @@
/*
* Nuvoton devices.
*/
-#define SIO_NCT6116D_ID 0xD283 /* NCT6116D chipset ID */
+#define SIO_NCT6126D_ID 0xD283 /* NCT6126D chipset ID */
#define SIO_LD_GPIO_NUVOTON 0x07 /* GPIO logical device */
@@ -62,7 +62,7 @@ enum chips {
f81866,
f81804,
f81865,
- nct6116d,
+ nct6126d,
};
static const char * const f7188x_names[] = {
@@ -74,7 +74,7 @@ static const char * const f7188x_names[] = {
"f81866",
"f81804",
"f81865",
- "nct6116d",
+ "nct6126d",
};
struct f7188x_sio {
@@ -187,8 +187,8 @@ static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset,
/* Output mode register (0:open drain 1:push-pull). */
#define f7188x_gpio_out_mode(base) ((base) + 3)
-#define f7188x_gpio_dir_invert(type) ((type) == nct6116d)
-#define f7188x_gpio_data_single(type) ((type) == nct6116d)
+#define f7188x_gpio_dir_invert(type) ((type) == nct6126d)
+#define f7188x_gpio_data_single(type) ((type) == nct6126d)
static struct f7188x_gpio_bank f71869_gpio_bank[] = {
F7188X_GPIO_BANK(0, 6, 0xF0, DRVNAME "-0"),
@@ -274,7 +274,7 @@ static struct f7188x_gpio_bank f81865_gpio_bank[] = {
F7188X_GPIO_BANK(60, 5, 0x90, DRVNAME "-6"),
};
-static struct f7188x_gpio_bank nct6116d_gpio_bank[] = {
+static struct f7188x_gpio_bank nct6126d_gpio_bank[] = {
F7188X_GPIO_BANK(0, 8, 0xE0, DRVNAME "-0"),
F7188X_GPIO_BANK(10, 8, 0xE4, DRVNAME "-1"),
F7188X_GPIO_BANK(20, 8, 0xE8, DRVNAME "-2"),
@@ -282,7 +282,7 @@ static struct f7188x_gpio_bank nct6116d_gpio_bank[] = {
F7188X_GPIO_BANK(40, 8, 0xF0, DRVNAME "-4"),
F7188X_GPIO_BANK(50, 8, 0xF4, DRVNAME "-5"),
F7188X_GPIO_BANK(60, 8, 0xF8, DRVNAME "-6"),
- F7188X_GPIO_BANK(70, 1, 0xFC, DRVNAME "-7"),
+ F7188X_GPIO_BANK(70, 8, 0xFC, DRVNAME "-7"),
};
static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
@@ -490,9 +490,9 @@ static int f7188x_gpio_probe(struct platform_device *pdev)
data->nr_bank = ARRAY_SIZE(f81865_gpio_bank);
data->bank = f81865_gpio_bank;
break;
- case nct6116d:
- data->nr_bank = ARRAY_SIZE(nct6116d_gpio_bank);
- data->bank = nct6116d_gpio_bank;
+ case nct6126d:
+ data->nr_bank = ARRAY_SIZE(nct6126d_gpio_bank);
+ data->bank = nct6126d_gpio_bank;
break;
default:
return -ENODEV;
@@ -559,9 +559,9 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio)
case SIO_F81865_ID:
sio->type = f81865;
break;
- case SIO_NCT6116D_ID:
+ case SIO_NCT6126D_ID:
sio->device = SIO_LD_GPIO_NUVOTON;
- sio->type = nct6116d;
+ sio->type = nct6126d;
break;
default:
pr_info("Unsupported Fintek device 0x%04x\n", devid);
@@ -569,7 +569,7 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio)
}
/* double check manufacturer where possible */
- if (sio->type != nct6116d) {
+ if (sio->type != nct6126d) {
manid = superio_inw(addr, SIO_FINTEK_MANID);
if (manid != SIO_FINTEK_ID) {
pr_debug("Not a Fintek device at 0x%08x\n", addr);
@@ -581,7 +581,7 @@ static int __init f7188x_find(int addr, struct f7188x_sio *sio)
err = 0;
pr_info("Found %s at %#x\n", f7188x_names[sio->type], (unsigned int)addr);
- if (sio->type != nct6116d)
+ if (sio->type != nct6126d)
pr_info(" revision %d\n", superio_inb(addr, SIO_FINTEK_DEVREV));
err:
