This is a note to let you know that I've just added the patch titled
tpm_tis: Use tpm_chip_{start,stop} decoration inside tpm_tis_resume
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
tpm_tis-use-tpm_chip_-start-stop-decoration-inside-t.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit ab7381f1e48942238a61626d40d39f5cb2a0c69d
Author: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
Date: Wed Apr 26 20:29:27 2023 +0300
tpm_tis: Use tpm_chip_{start,stop} decoration inside tpm_tis_resume
[ Upstream commit 1398aa803f198b7a386fdd8404666043e95f4c16 ]
Before sending a TPM command, CLKRUN protocol must be disabled. This is not
done in the case of tpm1_do_selftest() call site inside tpm_tis_resume().
Address this by decorating the calls with tpm_chip_{start,stop}, which
should be always used to arm and disarm the TPM chip for transmission.
Finally, move the call to the main TPM driver callback as the last step
because it should arm the chip by itself, if it needs that type of
functionality.
Cc: stable@xxxxxxxxxxxxxxx
Reported-by: Jason A. Donenfeld <Jason@xxxxxxxxx>
Closes: https://lore.kernel.org/linux-integrity/CS68AWILHXS4.3M36M1EKZLUMS@suppilovahvero/
Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()")
Reviewed-by: Jerry Snitselaar <jsnitsel@xxxxxxxxxx>
Signed-off-by: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index a35c117ee7c80..a5c22fb4ad428 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -1190,25 +1190,20 @@ static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
u32 intmask;
int rc;
- if (chip->ops->clk_enable != NULL)
- chip->ops->clk_enable(chip, true);
-
- /* reenable interrupts that device may have lost or
- * BIOS/firmware may have disabled
+ /*
+ * Re-enable interrupts that device may have lost or BIOS/firmware may
+ * have disabled.
*/
rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), priv->irq);
- if (rc < 0)
- goto out;
+ if (rc < 0) {
+ dev_err(&chip->dev, "Setting IRQ failed.\n");
+ return;
+ }
intmask = priv->int_mask | TPM_GLOBAL_INT_ENABLE;
-
- tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
-
-out:
- if (chip->ops->clk_enable != NULL)
- chip->ops->clk_enable(chip, false);
-
- return;
+ rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
+ if (rc < 0)
+ dev_err(&chip->dev, "Enabling interrupts failed.\n");
}
int tpm_tis_resume(struct device *dev)
@@ -1216,27 +1211,27 @@ int tpm_tis_resume(struct device *dev)
struct tpm_chip *chip = dev_get_drvdata(dev);
int ret;
- ret = tpm_tis_request_locality(chip, 0);
- if (ret < 0)
+ ret = tpm_chip_start(chip);
+ if (ret)
return ret;
if (chip->flags & TPM_CHIP_FLAG_IRQ)
tpm_tis_reenable_interrupts(chip);
- ret = tpm_pm_resume(dev);
- if (ret)
- goto out;
-
/*
* TPM 1.2 requires self-test on resume. This function actually returns
* an error code but for unknown reason it isn't handled.
*/
if (!(chip->flags & TPM_CHIP_FLAG_TPM2))
tpm1_do_selftest(chip);
-out:
- tpm_tis_relinquish_locality(chip, 0);
- return ret;
+ tpm_chip_stop(chip);
+
+ ret = tpm_pm_resume(dev);
+ if (ret)
+ return ret;
+
+ return 0;
}
EXPORT_SYMBOL_GPL(tpm_tis_resume);
#endif
