This is a note to let you know that I've just added the patch titled
spi: spi-imx: fix MX51_ECSPI_* macros when cs > 3
to the 4.19-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
spi-spi-imx-fix-mx51_ecspi_-macros-when-cs-3.patch
and it can be found in the queue-4.19 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit e08e1481febad84977c997a5c8162bccb917b288
Author: Kevin Groeneveld <kgroeneveld@xxxxxxxxxxxx>
Date: Sat Mar 18 18:21:32 2023 -0400
spi: spi-imx: fix MX51_ECSPI_* macros when cs > 3
[ Upstream commit 87c614175bbf28d3fd076dc2d166bac759e41427 ]
When using gpio based chip select the cs value can go outside the range
0 – 3. The various MX51_ECSPI_* macros did not take this into consideration
resulting in possible corruption of the configuration.
For example for any cs value over 3 the SCLKPHA bits would not be set and
other values in the register possibly corrupted.
One way to fix this is to just mask the cs bits to 2 bits. This still
allows all 4 native chip selects to work as well as gpio chip selects
(which can use any of the 4 chip select configurations).
Signed-off-by: Kevin Groeneveld <kgroeneveld@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230318222132.3373-1-kgroeneveld@xxxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index ec2296a4c44dd..1ad4b69292ad8 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -237,6 +237,18 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
return true;
}
+/*
+ * Note the number of natively supported chip selects for MX51 is 4. Some
+ * devices may have less actual SS pins but the register map supports 4. When
+ * using gpio chip selects the cs values passed into the macros below can go
+ * outside the range 0 - 3. We therefore need to limit the cs value to avoid
+ * corrupting bits outside the allocated locations.
+ *
+ * The simplest way to do this is to just mask the cs bits to 2 bits. This
+ * still allows all 4 native chip selects to work as well as gpio chip selects
+ * (which can use any of the 4 chip select configurations).
+ */
+
#define MX51_ECSPI_CTRL 0x08
#define MX51_ECSPI_CTRL_ENABLE (1 << 0)
#define MX51_ECSPI_CTRL_XCH (1 << 2)
@@ -245,16 +257,16 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
#define MX51_ECSPI_CTRL_DRCTL(drctl) ((drctl) << 16)
#define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8
#define MX51_ECSPI_CTRL_PREDIV_OFFSET 12
-#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18)
+#define MX51_ECSPI_CTRL_CS(cs) ((cs & 3) << 18)
#define MX51_ECSPI_CTRL_BL_OFFSET 20
#define MX51_ECSPI_CTRL_BL_MASK (0xfff << 20)
#define MX51_ECSPI_CONFIG 0x0c
-#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
-#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
-#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
-#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
-#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs) + 20))
+#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs & 3) + 0))
+#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs & 3) + 4))
+#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs & 3) + 8))
+#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs & 3) + 12))
+#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs & 3) + 20))
#define MX51_ECSPI_INT 0x10
#define MX51_ECSPI_INT_TEEN (1 << 0)
