This is a note to let you know that I've just added the patch titled
drm/amd/display: Fix 4to1 MPC black screen with DPP RCO
to the 6.2-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drm-amd-display-fix-4to1-mpc-black-screen-with-dpp-rco.patch
and it can be found in the queue-6.2 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From bf224e00a9f54e2bf14b4d720a09c3d2f4aa4aa8 Mon Sep 17 00:00:00 2001
From: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
Date: Mon, 13 Mar 2023 13:23:45 -0400
Subject: drm/amd/display: Fix 4to1 MPC black screen with DPP RCO
From: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
commit bf224e00a9f54e2bf14b4d720a09c3d2f4aa4aa8 upstream.
[Why]
DPP Root clock optimization when combined with 4to1 MPC combine results
in the screen turning black.
This is because the DPPCLK is stopped during the middle of an
optimize_bandwidth sequence during commit_minimal_transition without
going through plane power down/power up.
[How]
The intent of a 0Hz DPP clock through update_clocks is to disable the
DTO. This differs from the behavior of stopping the DPPCLK entirely
(utilizing a 0Hz clock on some ASIC) so it's better to move this logic
to reside next to plane power up/power down where we gate the HUBP/DPP
DOMAIN.
The new sequence should be:
Power down: PG enabled -> RCO on
Power up: RCO off -> PG disabled
Rename power_on_plane to power_on_plane_resources to reflect the
actual operation that's occurring.
Cc: stable@xxxxxxxxxxxxxxx
Cc: Mario Limonciello <mario.limonciello@xxxxxxx>
Reviewed-by: Jun Lei <Jun.Lei@xxxxxxx>
Acked-by: Qingqing Zhuo <qingqing.zhuo@xxxxxxx>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
Tested-by: Daniel Wheeler <daniel.wheeler@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 12 ++++++-
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 8 +++-
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c | 13 +------
drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c | 23 ++++++++++++++
drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c | 10 ++++++
drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.h | 2 +
drivers/gpu/drm/amd/display/dc/dcn314/dcn314_init.c | 1
drivers/gpu/drm/amd/display/dc/inc/hw/dccg.h | 23 +++++++-------
drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h | 4 ++
9 files changed, 71 insertions(+), 25 deletions(-)
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -728,11 +728,15 @@ void dcn10_hubp_pg_control(
}
}
-static void power_on_plane(
+static void power_on_plane_resources(
struct dce_hwseq *hws,
int plane_id)
{
DC_LOGGER_INIT(hws->ctx->logger);
+
+ if (hws->funcs.dpp_root_clock_control)
+ hws->funcs.dpp_root_clock_control(hws, plane_id, true);
+
if (REG(DC_IP_REQUEST_CNTL)) {
REG_SET(DC_IP_REQUEST_CNTL, 0,
IP_REQUEST_EN, 1);
@@ -1239,11 +1243,15 @@ void dcn10_plane_atomic_power_down(struc
hws->funcs.hubp_pg_control(hws, hubp->inst, false);
dpp->funcs->dpp_reset(dpp);
+
REG_SET(DC_IP_REQUEST_CNTL, 0,
IP_REQUEST_EN, 0);
DC_LOG_DEBUG(
"Power gated front end %d\n", hubp->inst);
}
+
+ if (hws->funcs.dpp_root_clock_control)
+ hws->funcs.dpp_root_clock_control(hws, dpp->inst, false);
}
/* disable HW used by plane.
@@ -2464,7 +2472,7 @@ static void dcn10_enable_plane(
undo_DEGVIDCN10_253_wa(dc);
- power_on_plane(dc->hwseq,
+ power_on_plane_resources(dc->hwseq,
pipe_ctx->plane_res.hubp->inst);
/* enable DCFCLK current DCHUB */
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -1110,11 +1110,15 @@ void dcn20_blank_pixel_data(
}
-static void dcn20_power_on_plane(
+static void dcn20_power_on_plane_resources(
struct dce_hwseq *hws,
struct pipe_ctx *pipe_ctx)
{
DC_LOGGER_INIT(hws->ctx->logger);
+
+ if (hws->funcs.dpp_root_clock_control)
+ hws->funcs.dpp_root_clock_control(hws, pipe_ctx->plane_res.dpp->inst, true);
+
if (REG(DC_IP_REQUEST_CNTL)) {
REG_SET(DC_IP_REQUEST_CNTL, 0,
IP_REQUEST_EN, 1);
@@ -1138,7 +1142,7 @@ static void dcn20_enable_plane(struct dc
//if (dc->debug.sanity_checks) {
// dcn10_verify_allow_pstate_change_high(dc);
//}
- dcn20_power_on_plane(dc->hwseq, pipe_ctx);
+ dcn20_power_on_plane_resources(dc->hwseq, pipe_ctx);
/* enable DCFCLK current DCHUB */
pipe_ctx->plane_res.hubp->funcs->hubp_clk_cntl(pipe_ctx->plane_res.hubp, true);
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dccg.c
@@ -66,17 +66,8 @@ void dccg31_update_dpp_dto(struct dccg *
REG_UPDATE(DPPCLK_DTO_CTRL,
DPPCLK_DTO_ENABLE[dpp_inst], 1);
} else {
- //DTO must be enabled to generate a 0Hz clock output
- if (dccg->ctx->dc->debug.root_clock_optimization.bits.dpp) {
- REG_UPDATE(DPPCLK_DTO_CTRL,
- DPPCLK_DTO_ENABLE[dpp_inst], 1);
- REG_SET_2(DPPCLK_DTO_PARAM[dpp_inst], 0,
- DPPCLK0_DTO_PHASE, 0,
- DPPCLK0_DTO_MODULO, 1);
- } else {
- REG_UPDATE(DPPCLK_DTO_CTRL,
- DPPCLK_DTO_ENABLE[dpp_inst], 0);
- }
+ REG_UPDATE(DPPCLK_DTO_CTRL,
+ DPPCLK_DTO_ENABLE[dpp_inst], 0);
}
dccg->pipe_dppclk_khz[dpp_inst] = req_dppclk;
}
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_dccg.c
@@ -289,8 +289,31 @@ static void dccg314_set_valid_pixel_rate
dccg314_set_dtbclk_dto(dccg, &dto_params);
}
+static void dccg314_dpp_root_clock_control(
+ struct dccg *dccg,
+ unsigned int dpp_inst,
+ bool clock_on)
+{
+ struct dcn_dccg *dccg_dcn = TO_DCN_DCCG(dccg);
+
+ if (clock_on) {
+ /* turn off the DTO and leave phase/modulo at max */
+ REG_UPDATE(DPPCLK_DTO_CTRL, DPPCLK_DTO_ENABLE[dpp_inst], 0);
+ REG_SET_2(DPPCLK_DTO_PARAM[dpp_inst], 0,
+ DPPCLK0_DTO_PHASE, 0xFF,
+ DPPCLK0_DTO_MODULO, 0xFF);
+ } else {
+ /* turn on the DTO to generate a 0hz clock */
+ REG_UPDATE(DPPCLK_DTO_CTRL, DPPCLK_DTO_ENABLE[dpp_inst], 1);
+ REG_SET_2(DPPCLK_DTO_PARAM[dpp_inst], 0,
+ DPPCLK0_DTO_PHASE, 0,
+ DPPCLK0_DTO_MODULO, 1);
+ }
+}
+
static const struct dccg_funcs dccg314_funcs = {
.update_dpp_dto = dccg31_update_dpp_dto,
+ .dpp_root_clock_control = dccg314_dpp_root_clock_control,
.get_dccg_ref_freq = dccg31_get_dccg_ref_freq,
.dccg_init = dccg31_init,
.set_dpstreamclk = dccg314_set_dpstreamclk,
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.c
@@ -392,6 +392,16 @@ void dcn314_set_pixels_per_cycle(struct
pix_per_cycle);
}
+void dcn314_dpp_root_clock_control(struct dce_hwseq *hws, unsigned int dpp_inst, bool clock_on)
+{
+ if (!hws->ctx->dc->debug.root_clock_optimization.bits.dpp)
+ return;
+
+ if (hws->ctx->dc->res_pool->dccg->funcs->dpp_root_clock_control)
+ hws->ctx->dc->res_pool->dccg->funcs->dpp_root_clock_control(
+ hws->ctx->dc->res_pool->dccg, dpp_inst, clock_on);
+}
+
void dcn314_hubp_pg_control(struct dce_hwseq *hws, unsigned int hubp_inst, bool power_on)
{
struct dc_context *ctx = hws->ctx;
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_hwseq.h
@@ -43,4 +43,6 @@ void dcn314_set_pixels_per_cycle(struct
void dcn314_hubp_pg_control(struct dce_hwseq *hws, unsigned int hubp_inst, bool power_on);
+void dcn314_dpp_root_clock_control(struct dce_hwseq *hws, unsigned int dpp_inst, bool clock_on);
+
#endif /* __DC_HWSS_DCN314_H__ */
--- a/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_init.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn314/dcn314_init.c
@@ -137,6 +137,7 @@ static const struct hwseq_private_funcs
.plane_atomic_disable = dcn20_plane_atomic_disable,
.plane_atomic_power_down = dcn10_plane_atomic_power_down,
.enable_power_gating_plane = dcn314_enable_power_gating_plane,
+ .dpp_root_clock_control = dcn314_dpp_root_clock_control,
.hubp_pg_control = dcn314_hubp_pg_control,
.program_all_writeback_pipes_in_tree = dcn30_program_all_writeback_pipes_in_tree,
.update_odm = dcn314_update_odm,
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/dccg.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/dccg.h
@@ -148,18 +148,21 @@ struct dccg_funcs {
struct dccg *dccg,
int inst);
-void (*set_pixel_rate_div)(
- struct dccg *dccg,
- uint32_t otg_inst,
- enum pixel_rate_div k1,
- enum pixel_rate_div k2);
+ void (*set_pixel_rate_div)(struct dccg *dccg,
+ uint32_t otg_inst,
+ enum pixel_rate_div k1,
+ enum pixel_rate_div k2);
-void (*set_valid_pixel_rate)(
- struct dccg *dccg,
- int ref_dtbclk_khz,
- int otg_inst,
- int pixclk_khz);
+ void (*set_valid_pixel_rate)(
+ struct dccg *dccg,
+ int ref_dtbclk_khz,
+ int otg_inst,
+ int pixclk_khz);
+ void (*dpp_root_clock_control)(
+ struct dccg *dccg,
+ unsigned int dpp_inst,
+ bool clock_on);
};
#endif //__DAL_DCCG_H__
--- a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer_private.h
@@ -115,6 +115,10 @@ struct hwseq_private_funcs {
void (*plane_atomic_disable)(struct dc *dc, struct pipe_ctx *pipe_ctx);
void (*enable_power_gating_plane)(struct dce_hwseq *hws,
bool enable);
+ void (*dpp_root_clock_control)(
+ struct dce_hwseq *hws,
+ unsigned int dpp_inst,
+ bool clock_on);
void (*dpp_pg_control)(struct dce_hwseq *hws,
unsigned int dpp_inst,
bool power_on);
Patches currently in stable-queue which might be from nicholas.kazlauskas@xxxxxxx are
queue-6.2/drm-amd-display-add-null-plane_state-check-for-cursor-disable-logic.patch
queue-6.2/drm-amd-display-fix-4to1-mpc-black-screen-with-dpp-rco.patch
