Patch "qcom: llcc/edac: Support polling mode for ECC handling" has been added to the 6.3-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    qcom: llcc/edac: Support polling mode for ECC handling

to the 6.3-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     qcom-llcc-edac-support-polling-mode-for-ecc-handling.patch
and it can be found in the queue-6.3 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit e9d6a18de84eae08bb39c3653c52a2518826fc0e
Author: Manivannan Sadhasivam <mani@xxxxxxxxxx>
Date:   Tue Mar 14 13:34:42 2023 +0530

    qcom: llcc/edac: Support polling mode for ECC handling
    
    [ Upstream commit 721d3e91bfc93975c5e1a76c7d588dd8df5d82da ]
    
    Not all Qcom platforms support IRQ mode for ECC handling. For those
    platforms, the current EDAC driver will not be probed due to missing ECC
    IRQ in devicetree.
    
    So add support for polling mode so that the EDAC driver can be used on all
    Qcom platforms supporting LLCC.
    
    The polling delay of 5000ms is chosen based on Qcom downstream/vendor
    driver.
    
    Reported-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
    Tested-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
    Tested-by: Steev Klimaszewski <steev@xxxxxxxx> # Thinkpad X13s
    Tested-by: Andrew Halaney <ahalaney@xxxxxxxxxx> # sa8540p-ride
    Reviewed-by: Borislav Petkov (AMD) <bp@xxxxxxxxx>
    Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
    Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
    Link: https://lore.kernel.org/r/20230314080443.64635-14-manivannan.sadhasivam@xxxxxxxxxx
    Stable-dep-of: cca94f1dd6d0 ("soc: qcom: llcc: Do not create EDAC platform device on SDM845")
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c
index 3256254c3722c..a7158b570ddd0 100644
--- a/drivers/edac/qcom_edac.c
+++ b/drivers/edac/qcom_edac.c
@@ -76,6 +76,8 @@
 #define DRP0_INTERRUPT_ENABLE           BIT(6)
 #define SB_DB_DRP_INTERRUPT_ENABLE      0x3
 
+#define ECC_POLL_MSEC			5000
+
 enum {
 	LLCC_DRAM_CE = 0,
 	LLCC_DRAM_UE,
@@ -285,8 +287,7 @@ dump_syn_reg(struct edac_device_ctl_info *edev_ctl, int err_type, u32 bank)
 	return ret;
 }
 
-static irqreturn_t
-llcc_ecc_irq_handler(int irq, void *edev_ctl)
+static irqreturn_t llcc_ecc_irq_handler(int irq, void *edev_ctl)
 {
 	struct edac_device_ctl_info *edac_dev_ctl = edev_ctl;
 	struct llcc_drv_data *drv = edac_dev_ctl->dev->platform_data;
@@ -332,6 +333,11 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl)
 	return irq_rc;
 }
 
+static void llcc_ecc_check(struct edac_device_ctl_info *edev_ctl)
+{
+	llcc_ecc_irq_handler(0, edev_ctl);
+}
+
 static int qcom_llcc_edac_probe(struct platform_device *pdev)
 {
 	struct llcc_drv_data *llcc_driv_data = pdev->dev.platform_data;
@@ -359,29 +365,31 @@ static int qcom_llcc_edac_probe(struct platform_device *pdev)
 	edev_ctl->ctl_name = "llcc";
 	edev_ctl->panic_on_ue = LLCC_ERP_PANIC_ON_UE;
 
-	rc = edac_device_add_device(edev_ctl);
-	if (rc)
-		goto out_mem;
-
-	platform_set_drvdata(pdev, edev_ctl);
-
-	/* Request for ecc irq */
+	/* Check if LLCC driver has passed ECC IRQ */
 	ecc_irq = llcc_driv_data->ecc_irq;
-	if (ecc_irq < 0) {
-		rc = -ENODEV;
-		goto out_dev;
-	}
-	rc = devm_request_irq(dev, ecc_irq, llcc_ecc_irq_handler,
+	if (ecc_irq > 0) {
+		/* Use interrupt mode if IRQ is available */
+		rc = devm_request_irq(dev, ecc_irq, llcc_ecc_irq_handler,
 			      IRQF_TRIGGER_HIGH, "llcc_ecc", edev_ctl);
-	if (rc)
-		goto out_dev;
+		if (!rc) {
+			edac_op_state = EDAC_OPSTATE_INT;
+			goto irq_done;
+		}
+	}
 
-	return rc;
+	/* Fall back to polling mode otherwise */
+	edev_ctl->poll_msec = ECC_POLL_MSEC;
+	edev_ctl->edac_check = llcc_ecc_check;
+	edac_op_state = EDAC_OPSTATE_POLL;
 
-out_dev:
-	edac_device_del_device(edev_ctl->dev);
-out_mem:
-	edac_device_free_ctl_info(edev_ctl);
+irq_done:
+	rc = edac_device_add_device(edev_ctl);
+	if (rc) {
+		edac_device_free_ctl_info(edev_ctl);
+		return rc;
+	}
+
+	platform_set_drvdata(pdev, edev_ctl);
 
 	return rc;
 }
diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
index 26efe12012a0d..e417bd285d9db 100644
--- a/drivers/soc/qcom/llcc-qcom.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -1001,13 +1001,12 @@ static int qcom_llcc_probe(struct platform_device *pdev)
 		goto err;
 
 	drv_data->ecc_irq = platform_get_irq_optional(pdev, 0);
-	if (drv_data->ecc_irq >= 0) {
-		llcc_edac = platform_device_register_data(&pdev->dev,
-						"qcom_llcc_edac", -1, drv_data,
-						sizeof(*drv_data));
-		if (IS_ERR(llcc_edac))
-			dev_err(dev, "Failed to register llcc edac driver\n");
-	}
+
+	llcc_edac = platform_device_register_data(&pdev->dev,
+					"qcom_llcc_edac", -1, drv_data,
+					sizeof(*drv_data));
+	if (IS_ERR(llcc_edac))
+		dev_err(dev, "Failed to register llcc edac driver\n");
 
 	return 0;
 err:



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux