Patch "ixgbe: Enable setting RSS table to default values" has been added to the 4.19-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    ixgbe: Enable setting RSS table to default values

to the 4.19-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     ixgbe-enable-setting-rss-table-to-default-values.patch
and it can be found in the queue-4.19 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit 484d9c63c80204cdcc8ef9626f05ec3cba0076f9
Author: Joe Damato <jdamato@xxxxxxxxxx>
Date:   Sun Apr 16 19:12:23 2023 +0000

    ixgbe: Enable setting RSS table to default values
    
    [ Upstream commit e85d3d55875f7a1079edfbc4e4e98d6f8aea9ac7 ]
    
    ethtool uses `ETHTOOL_GRXRINGS` to compute how many queues are supported
    by RSS. The driver should return the smaller of either:
      - The maximum number of RSS queues the device supports, OR
      - The number of RX queues configured
    
    Prior to this change, running `ethtool -X $iface default` fails if the
    number of queues configured is larger than the number supported by RSS,
    even though changing the queue count correctly resets the flowhash to
    use all supported queues.
    
    Other drivers (for example, i40e) will succeed but the flow hash will
    reset to support the maximum number of queues supported by RSS, even if
    that amount is smaller than the configured amount.
    
    Prior to this change:
    
    $ sudo ethtool -L eth1 combined 20
    $ sudo ethtool -x eth1
    RX flow hash indirection table for eth1 with 20 RX ring(s):
        0:      0     1     2     3     4     5     6     7
        8:      8     9    10    11    12    13    14    15
       16:      0     1     2     3     4     5     6     7
       24:      8     9    10    11    12    13    14    15
       32:      0     1     2     3     4     5     6     7
    ...
    
    You can see that the flowhash was correctly set to use the maximum
    number of queues supported by the driver (16).
    
    However, asking the NIC to reset to "default" fails:
    
    $ sudo ethtool -X eth1 default
    Cannot set RX flow hash configuration: Invalid argument
    
    After this change, the flowhash can be reset to default which will use
    all of the available RSS queues (16) or the configured queue count,
    whichever is smaller.
    
    Starting with eth1 which has 10 queues and a flowhash distributing to
    all 10 queues:
    
    $ sudo ethtool -x eth1
    RX flow hash indirection table for eth1 with 10 RX ring(s):
        0:      0     1     2     3     4     5     6     7
        8:      8     9     0     1     2     3     4     5
       16:      6     7     8     9     0     1     2     3
    ...
    
    Increasing the queue count to 48 resets the flowhash to distribute to 16
    queues, as it did before this patch:
    
    $ sudo ethtool -L eth1 combined 48
    $ sudo ethtool -x eth1
    RX flow hash indirection table for eth1 with 16 RX ring(s):
        0:      0     1     2     3     4     5     6     7
        8:      8     9    10    11    12    13    14    15
       16:      0     1     2     3     4     5     6     7
    ...
    
    Due to the other bugfix in this series, the flowhash can be set to use
    queues 0-5:
    
    $ sudo ethtool -X eth1 equal 5
    $ sudo ethtool -x eth1
    RX flow hash indirection table for eth1 with 16 RX ring(s):
        0:      0     1     2     3     4     0     1     2
        8:      3     4     0     1     2     3     4     0
       16:      1     2     3     4     0     1     2     3
    ...
    
    Due to this bugfix, the flowhash can be reset to default and use 16
    queues:
    
    $ sudo ethtool -X eth1 default
    $ sudo ethtool -x eth1
    RX flow hash indirection table for eth1 with 16 RX ring(s):
        0:      0     1     2     3     4     5     6     7
        8:      8     9    10    11    12    13    14    15
       16:      0     1     2     3     4     5     6     7
    ...
    
    Fixes: 91cd94bfe4f0 ("ixgbe: add basic support for setting and getting nfc controls")
    Signed-off-by: Joe Damato <jdamato@xxxxxxxxxx>
    Reviewed-by: Sridhar Samudrala <sridhar.samudrala@xxxxxxxxx>
    Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@xxxxxxxxx> (A Contingent worker at Intel)
    Signed-off-by: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index a852f9c920742..3d361557a63a3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -2539,6 +2539,14 @@ static int ixgbe_get_rss_hash_opts(struct ixgbe_adapter *adapter,
 	return 0;
 }
 
+static int ixgbe_rss_indir_tbl_max(struct ixgbe_adapter *adapter)
+{
+	if (adapter->hw.mac.type < ixgbe_mac_X550)
+		return 16;
+	else
+		return 64;
+}
+
 static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 			   u32 *rule_locs)
 {
@@ -2547,7 +2555,8 @@ static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 
 	switch (cmd->cmd) {
 	case ETHTOOL_GRXRINGS:
-		cmd->data = adapter->num_rx_queues;
+		cmd->data = min_t(int, adapter->num_rx_queues,
+				  ixgbe_rss_indir_tbl_max(adapter));
 		ret = 0;
 		break;
 	case ETHTOOL_GRXCLSRLCNT:
@@ -2949,14 +2958,6 @@ static int ixgbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
 	return ret;
 }
 
-static int ixgbe_rss_indir_tbl_max(struct ixgbe_adapter *adapter)
-{
-	if (adapter->hw.mac.type < ixgbe_mac_X550)
-		return 16;
-	else
-		return 64;
-}
-
 static u32 ixgbe_get_rxfh_key_size(struct net_device *netdev)
 {
 	return IXGBE_RSS_KEY_SIZE;



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux