Patch "arm64: dts: qcom: sc7280: fix EUD port properties" has been added to the 6.3-stable tree

[Sasha Levin <sashal@xxxxxxxxxx>]

This is a note to let you know that I've just added the patch titled

    arm64: dts: qcom: sc7280: fix EUD port properties

to the 6.3-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm64-dts-qcom-sc7280-fix-eud-port-properties.patch
and it can be found in the queue-6.3 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit c05f7f943b167710eadc495a76a4b072161782a2
Author: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Date:   Wed Mar 8 13:59:05 2023 +0100

    arm64: dts: qcom: sc7280: fix EUD port properties
    
    [ Upstream commit a369c74243ca4ad60b9de0ac5c2207fb4c4117b8 ]
    
    Nodes with unit addresses must have also 'reg' property:
    
      sc7280-herobrine-crd.dtb: eud@88e0000: ports:port@0: 'reg' is a required property
    
    Fixes: 0b059979090d ("arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector")
    Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
    Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
    Reviewed-by: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
    Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
    Link: https://lore.kernel.org/r/20230308125906.236885-10-krzysztof.kozlowski@xxxxxxxxxx
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 8f4ab6bd28864..c04bb158f4311 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3595,12 +3595,17 @@ eud: eud@88e0000 {
 			      <0 0x088e2000 0 0x1000>;
 			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
 			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				port@0 {
+					reg = <0>;
 					eud_ep: endpoint {
 						remote-endpoint = <&usb2_role_switch>;
 					};
 				};
 				port@1 {
+					reg = <1>;
 					eud_con: endpoint {
 						remote-endpoint = <&con_eud>;
 					};
@@ -3611,7 +3616,11 @@ eud_con: endpoint {
 		eud_typec: connector {
 			compatible = "usb-c-connector";
 			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				port@0 {
+					reg = <0>;
 					con_eud: endpoint {
 						remote-endpoint = <&eud_con>;
 					};