This is a note to let you know that I've just added the patch titled
pinctrl: qcom: lpass-lpi: set output value before enabling output
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
pinctrl-qcom-lpass-lpi-set-output-value-before-enabling-output.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 163bfb0cb1f6fbf961cf912cbde57399ea1ae0e8 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Date: Thu, 9 Mar 2023 16:49:46 +0100
Subject: pinctrl: qcom: lpass-lpi: set output value before enabling output
From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
commit 163bfb0cb1f6fbf961cf912cbde57399ea1ae0e8 upstream.
As per Hardware Programming Guide, when configuring pin as output,
set the pin value before setting output-enable (OE). Similar approach
is in main SoC TLMM pin controller.
Cc: <stable@xxxxxxxxxxxxxxx>
Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230309154949.658380-1-krzysztof.kozlowski@xxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -216,6 +216,15 @@ static int lpi_config_set(struct pinctrl
}
}
+ /*
+ * As per Hardware Programming Guide, when configuring pin as output,
+ * set the pin value before setting output-enable (OE).
+ */
+ if (output_enabled) {
+ val = u32_encode_bits(value ? 1 : 0, LPI_GPIO_VALUE_OUT_MASK);
+ lpi_gpio_write(pctrl, group, LPI_GPIO_VALUE_REG, val);
+ }
+
val = lpi_gpio_read(pctrl, group, LPI_GPIO_CFG_REG);
u32p_replace_bits(&val, pullup, LPI_GPIO_PULL_MASK);
@@ -225,11 +234,6 @@ static int lpi_config_set(struct pinctrl
lpi_gpio_write(pctrl, group, LPI_GPIO_CFG_REG, val);
- if (output_enabled) {
- val = u32_encode_bits(value ? 1 : 0, LPI_GPIO_VALUE_OUT_MASK);
- lpi_gpio_write(pctrl, group, LPI_GPIO_VALUE_REG, val);
- }
-
return 0;
}
Patches currently in stable-queue which might be from krzysztof.kozlowski@xxxxxxxxxx are
queue-6.1/soundwire-qcom-correct-setting-ignore-bit-on-v1.5.1.patch
queue-6.1/pinctrl-qcom-lpass-lpi-set-output-value-before-enabling-output.patch
