Patch "arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node" has been added to the 6.2-stable tree

[Sasha Levin <sashal@xxxxxxxxxx>]

This is a note to let you know that I've just added the patch titled

    arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node

to the 6.2-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm64-dts-qcom-ipq8074-hk01-enable-qmp-device-not-th.patch
and it can be found in the queue-6.2 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit af29ecc6129431c4bbc9aa35ebf95e4d245073d3
Author: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Date:   Fri Mar 24 05:16:50 2023 +0300

    arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node
    
    [ Upstream commit 72630ba422b70ea0874fc90d526353cf71c72488 ]
    
    Correct PCIe PHY enablement to refer the QMP device nodes rather than
    PHY device nodes. QMP nodes have 'status = "disabled"' property in the
    ipq8074.dtsi, while PHY nodes do not correspond to the actual device and
    do not have the status property.
    
    Fixes: e8a7fdc505bb ("arm64: dts: ipq8074: qcom: Re-arrange dts nodes based on address")
    Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
    Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
    Link: https://lore.kernel.org/r/20230324021651.1799969-1-dmitry.baryshkov@xxxxxxxxxx
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index ca3f96646b90d..5cf07caf41033 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -62,11 +62,11 @@ &pcie1 {
 	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 };
 
-&pcie_phy0 {
+&pcie_qmp0 {
 	status = "okay";
 };
 
-&pcie_phy1 {
+&pcie_qmp1 {
 	status = "okay";
 };