This is a note to let you know that I've just added the patch titled
net: dsa: microchip: ksz8863_smi: fix bulk access
to the 6.2-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-dsa-microchip-ksz8863_smi-fix-bulk-access.patch
and it can be found in the queue-6.2 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 7c005e72666ca1c534314c8f376daf91dd2c7264
Author: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
Date: Fri Mar 24 09:06:07 2023 +0100
net: dsa: microchip: ksz8863_smi: fix bulk access
[ Upstream commit 392ff7a84cbca34118ca286dfbfe8aee24605897 ]
Current regmap bulk access is broken, resulting to wrong reads/writes
if ksz_read64/ksz_write64 functions are used.
Mostly this issue was visible by using ksz8_fdb_dump(), which returned
corrupt MAC address.
The reason is that regmap was configured to have max_raw_read/write,
even if ksz8863_mdio_read/write functions are able to handle unlimited
read/write accesses. On ksz_read64 function we are using multiple 32bit
accesses by incrementing each access by 1 instead of 4. Resulting buffer
had 01234567.12345678 instead of 01234567.89abcdef.
We have multiple ways to fix it:
- enable 4 byte alignment for 32bit accesses. Since the HW do not have
this requirement. It will break driver.
- disable max_raw_* limit.
This patch is removing max_raw_* limit for regmap accesses in ksz8863_smi.
Fixes: 60a364760002 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support")
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c
index 2f4623f3bd852..3698112138b78 100644
--- a/drivers/net/dsa/microchip/ksz8863_smi.c
+++ b/drivers/net/dsa/microchip/ksz8863_smi.c
@@ -82,22 +82,16 @@ static const struct regmap_bus regmap_smi[] = {
{
.read = ksz8863_mdio_read,
.write = ksz8863_mdio_write,
- .max_raw_read = 1,
- .max_raw_write = 1,
},
{
.read = ksz8863_mdio_read,
.write = ksz8863_mdio_write,
.val_format_endian_default = REGMAP_ENDIAN_BIG,
- .max_raw_read = 2,
- .max_raw_write = 2,
},
{
.read = ksz8863_mdio_read,
.write = ksz8863_mdio_write,
.val_format_endian_default = REGMAP_ENDIAN_BIG,
- .max_raw_read = 4,
- .max_raw_write = 4,
}
};
@@ -108,7 +102,6 @@ static const struct regmap_config ksz8863_regmap_config[] = {
.pad_bits = 24,
.val_bits = 8,
.cache_type = REGCACHE_NONE,
- .use_single_read = 1,
.lock = ksz_regmap_lock,
.unlock = ksz_regmap_unlock,
},
@@ -118,7 +111,6 @@ static const struct regmap_config ksz8863_regmap_config[] = {
.pad_bits = 24,
.val_bits = 16,
.cache_type = REGCACHE_NONE,
- .use_single_read = 1,
.lock = ksz_regmap_lock,
.unlock = ksz_regmap_unlock,
},
@@ -128,7 +120,6 @@ static const struct regmap_config ksz8863_regmap_config[] = {
.pad_bits = 24,
.val_bits = 32,
.cache_type = REGCACHE_NONE,
- .use_single_read = 1,
.lock = ksz_regmap_lock,
.unlock = ksz_regmap_unlock,
}
