This is a note to let you know that I've just added the patch titled arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio to the 6.1-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm64-dts-imx8dxl-evk-fix-eqos-phy-reset-gpio.patch and it can be found in the queue-6.1 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. commit 109b37ddb491b628d2ecb04ec1783c67532cecde Author: Andrew Halaney <ahalaney@xxxxxxxxxx> Date: Tue Feb 14 11:15:05 2023 -0600 arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio [ Upstream commit feafeb53140af3cde3fba46b292b15b3a0c0635c ] The deprecated property is named snps,reset-gpio, but this devicetree used snps,reset-gpios instead which results in the reset not being used and the following make dtbs_check error: ./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us' From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml Use the preferred method of defining the reset gpio in the phy node itself. Note that this drops the 10 us pre-delay, but prior this wasn't used at all and a pre-delay doesn't make much sense in this context so it should be fine. Fixes: 8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board") Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index 96f5947ed5f41..3af4c76369741 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -99,8 +99,6 @@ &eqos { phy-handle = <ðphy0>; nvmem-cells = <&fec_mac1>; nvmem-cell-names = "mac-address"; - snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>; - snps,reset-delays-us = <10 20 200000>; status = "okay"; mdio { @@ -114,6 +112,9 @@ ethphy0: ethernet-phy@0 { eee-broken-1000t; qca,disable-smarteee; qca,disable-hibernation-mode; + reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <20>; + reset-deassert-us = <200000>; vddio-supply = <&vddio0>; vddio0: vddio-regulator {