This is a note to let you know that I've just added the patch titled
serial: sc16is7xx: setup GPIO controller later in probe
to the 5.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
serial-sc16is7xx-setup-gpio-controller-later-in-prob.patch
and it can be found in the queue-5.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 914f57423cbf58e7008cb2be81d54e2ac1706d58
Author: Isaac True <isaac.true@xxxxxxxxxxxxx>
Date: Wed Nov 30 11:55:30 2022 +0100
serial: sc16is7xx: setup GPIO controller later in probe
[ Upstream commit c8f71b49ee4d28930c4a6798d1969fa91dc4ef3e ]
The GPIO controller component of the sc16is7xx driver is setup too
early, which can result in a race condition where another device tries
to utilise the GPIO lines before the sc16is7xx device has finished
initialising.
This issue manifests itself as an Oops when the GPIO lines are configured:
Unable to handle kernel read from unreadable memory at virtual address
...
pc : sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx]
lr : sc16is7xx_gpio_direction_output+0x4c/0x108 [sc16is7xx]
...
Call trace:
sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx]
gpiod_direction_output_raw_commit+0x64/0x318
gpiod_direction_output+0xb0/0x170
create_gpio_led+0xec/0x198
gpio_led_probe+0x16c/0x4f0
platform_drv_probe+0x5c/0xb0
really_probe+0xe8/0x448
driver_probe_device+0xe8/0x138
__device_attach_driver+0x94/0x118
bus_for_each_drv+0x8c/0xe0
__device_attach+0x100/0x1b8
device_initial_probe+0x28/0x38
bus_probe_device+0xa4/0xb0
deferred_probe_work_func+0x90/0xe0
process_one_work+0x1c4/0x480
worker_thread+0x54/0x430
kthread+0x138/0x150
ret_from_fork+0x10/0x1c
This patch moves the setup of the GPIO controller functions to later in the
probe function, ensuring the sc16is7xx device has already finished
initialising by the time other devices try to make use of the GPIO lines.
The error handling has also been reordered to reflect the new
initialisation order.
Co-developed-by: Wen-chien Jesse Sung <jesse.sung@xxxxxxxxxxxxx>
Signed-off-by: Wen-chien Jesse Sung <jesse.sung@xxxxxxxxxxxxx>
Signed-off-by: Isaac True <isaac.true@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20221130105529.698385-1-isaac.true@xxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 04b4ed5d06341..7ece8d1a23cb3 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1243,25 +1243,6 @@ static int sc16is7xx_probe(struct device *dev,
}
sched_set_fifo(s->kworker_task);
-#ifdef CONFIG_GPIOLIB
- if (devtype->nr_gpio) {
- /* Setup GPIO cotroller */
- s->gpio.owner = THIS_MODULE;
- s->gpio.parent = dev;
- s->gpio.label = dev_name(dev);
- s->gpio.direction_input = sc16is7xx_gpio_direction_input;
- s->gpio.get = sc16is7xx_gpio_get;
- s->gpio.direction_output = sc16is7xx_gpio_direction_output;
- s->gpio.set = sc16is7xx_gpio_set;
- s->gpio.base = -1;
- s->gpio.ngpio = devtype->nr_gpio;
- s->gpio.can_sleep = 1;
- ret = gpiochip_add_data(&s->gpio, s);
- if (ret)
- goto out_thread;
- }
-#endif
-
/* reset device, purging any pending irq / data */
regmap_write(s->regmap, SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT,
SC16IS7XX_IOCONTROL_SRESET_BIT);
@@ -1327,6 +1308,25 @@ static int sc16is7xx_probe(struct device *dev,
s->p[u].irda_mode = true;
}
+#ifdef CONFIG_GPIOLIB
+ if (devtype->nr_gpio) {
+ /* Setup GPIO cotroller */
+ s->gpio.owner = THIS_MODULE;
+ s->gpio.parent = dev;
+ s->gpio.label = dev_name(dev);
+ s->gpio.direction_input = sc16is7xx_gpio_direction_input;
+ s->gpio.get = sc16is7xx_gpio_get;
+ s->gpio.direction_output = sc16is7xx_gpio_direction_output;
+ s->gpio.set = sc16is7xx_gpio_set;
+ s->gpio.base = -1;
+ s->gpio.ngpio = devtype->nr_gpio;
+ s->gpio.can_sleep = 1;
+ ret = gpiochip_add_data(&s->gpio, s);
+ if (ret)
+ goto out_thread;
+ }
+#endif
+
/*
* Setup interrupt. We first try to acquire the IRQ line as level IRQ.
* If that succeeds, we can allow sharing the interrupt as well.
@@ -1346,18 +1346,19 @@ static int sc16is7xx_probe(struct device *dev,
if (!ret)
return 0;
-out_ports:
- for (i--; i >= 0; i--) {
- uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
- clear_bit(s->p[i].port.line, &sc16is7xx_lines);
- }
-
#ifdef CONFIG_GPIOLIB
if (devtype->nr_gpio)
gpiochip_remove(&s->gpio);
out_thread:
#endif
+
+out_ports:
+ for (i--; i >= 0; i--) {
+ uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
+ clear_bit(s->p[i].port.line, &sc16is7xx_lines);
+ }
+
kthread_stop(s->kworker_task);
out_clk:
