This is a note to let you know that I've just added the patch titled
ARM: dts: exynos: correct TMU phandle in Odroid HC1
to the 5.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-exynos-correct-tmu-phandle-in-odroid-hc1.patch
and it can be found in the queue-5.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 2e3d0e20d8456f876607a8af61fdb83dfbf98cb6 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Date: Thu, 9 Feb 2023 11:58:40 +0100
Subject: ARM: dts: exynos: correct TMU phandle in Odroid HC1
From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
commit 2e3d0e20d8456f876607a8af61fdb83dfbf98cb6 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: 1ac49427b566 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board")
Cc: <stable@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230209105841.779596-5-krzysztof.kozlowski@xxxxxxxxxx
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/exynos5422-odroidhc1.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -29,7 +29,7 @@
thermal-zones {
cpu0_thermal: cpu0-thermal {
- thermal-sensors = <&tmu_cpu0 0>;
+ thermal-sensors = <&tmu_cpu0>;
trips {
cpu0_alert0: cpu-alert-0 {
temperature = <70000>; /* millicelsius */
@@ -84,7 +84,7 @@
};
};
cpu1_thermal: cpu1-thermal {
- thermal-sensors = <&tmu_cpu1 0>;
+ thermal-sensors = <&tmu_cpu1>;
trips {
cpu1_alert0: cpu-alert-0 {
temperature = <70000>;
@@ -128,7 +128,7 @@
};
};
cpu2_thermal: cpu2-thermal {
- thermal-sensors = <&tmu_cpu2 0>;
+ thermal-sensors = <&tmu_cpu2>;
trips {
cpu2_alert0: cpu-alert-0 {
temperature = <70000>;
@@ -172,7 +172,7 @@
};
};
cpu3_thermal: cpu3-thermal {
- thermal-sensors = <&tmu_cpu3 0>;
+ thermal-sensors = <&tmu_cpu3>;
trips {
cpu3_alert0: cpu-alert-0 {
temperature = <70000>;
@@ -216,7 +216,7 @@
};
};
gpu_thermal: gpu-thermal {
- thermal-sensors = <&tmu_gpu 0>;
+ thermal-sensors = <&tmu_gpu>;
trips {
gpu_alert0: gpu-alert-0 {
temperature = <70000>;
Patches currently in stable-queue which might be from krzysztof.kozlowski@xxxxxxxxxx are
queue-5.10/arm-dts-exynos-correct-wr-active-property-in-exynos3.patch
queue-5.10/asoc-dt-bindings-meson-fix-gx-card-codec-node-regex.patch
queue-5.10/arm-dts-exynos-correct-tmu-phandle-in-exynos4.patch
queue-5.10/arm-dts-exynos-correct-tmu-phandle-in-odroid-hc1.patch
queue-5.10/regulator-s5m8767-bounds-check-id-indexing-into-arra.patch
queue-5.10/arm-dts-exynos-correct-tmu-phandle-in-odroid-xu3-family.patch
queue-5.10/arm64-dts-qcom-sdm845-db845c-fix-audio-codec-interru.patch
queue-5.10/arm64-dts-qcom-sc7180-correct-spmi-bus-address-cells.patch
queue-5.10/arm-dts-exynos-correct-tmu-phandle-in-exynos5250.patch
queue-5.10/arm-dts-exynos-use-exynos5420-compatible-for-the-mip.patch
queue-5.10/arm-s3c-fix-s3c64xx_set_timer_source-prototype.patch
queue-5.10/arm-dts-exynos-correct-tmu-phandle-in-exynos4210.patch
queue-5.10/arm-dts-exynos-correct-hdmi-phy-compatible-in-exynos4.patch
queue-5.10/arm-dts-exynos-correct-tmu-phandle-in-odroid-xu.patch
