This is a note to let you know that I've just added the patch titled
powerpc/eeh: Small refactor of eeh_handle_normal_event()
to the 5.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
powerpc-eeh-small-refactor-of-eeh_handle_normal_even.patch
and it can be found in the queue-5.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit f2fc37ae5c5a3779d6792350f8a7dfcb7fdb5317
Author: Daniel Axtens <dja@xxxxxxxxxx>
Date: Fri Oct 15 18:06:27 2021 +1100
powerpc/eeh: Small refactor of eeh_handle_normal_event()
[ Upstream commit 10b34ece132ee46dc4e6459c765d180c422a09fa ]
The control flow of eeh_handle_normal_event() is a bit tricky.
Break out one of the error handling paths - rather than be in an else
block, we'll make it part of the regular body of the function and put a
'goto out;' in the true limb of the if.
Signed-off-by: Daniel Axtens <dja@xxxxxxxxxx>
Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20211015070628.1331635-1-dja@xxxxxxxxxx
Stable-dep-of: 9efcdaac36e1 ("powerpc/eeh: Set channel state after notifying the drivers")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 3eff6a4888e79..cb3ac555c9446 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -1054,45 +1054,46 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
}
pr_info("EEH: Recovery successful.\n");
- } else {
- /*
- * About 90% of all real-life EEH failures in the field
- * are due to poorly seated PCI cards. Only 10% or so are
- * due to actual, failed cards.
- */
- pr_err("EEH: Unable to recover from failure from PHB#%x-PE#%x.\n"
- "Please try reseating or replacing it\n",
- pe->phb->global_number, pe->addr);
+ goto out;
+ }
- eeh_slot_error_detail(pe, EEH_LOG_PERM);
+ /*
+ * About 90% of all real-life EEH failures in the field
+ * are due to poorly seated PCI cards. Only 10% or so are
+ * due to actual, failed cards.
+ */
+ pr_err("EEH: Unable to recover from failure from PHB#%x-PE#%x.\n"
+ "Please try reseating or replacing it\n",
+ pe->phb->global_number, pe->addr);
- /* Notify all devices that they're about to go down. */
- eeh_set_channel_state(pe, pci_channel_io_perm_failure);
- eeh_set_irq_state(pe, false);
- eeh_pe_report("error_detected(permanent failure)", pe,
- eeh_report_failure, NULL);
+ eeh_slot_error_detail(pe, EEH_LOG_PERM);
- /* Mark the PE to be removed permanently */
- eeh_pe_state_mark(pe, EEH_PE_REMOVED);
+ /* Notify all devices that they're about to go down. */
+ eeh_set_channel_state(pe, pci_channel_io_perm_failure);
+ eeh_set_irq_state(pe, false);
+ eeh_pe_report("error_detected(permanent failure)", pe,
+ eeh_report_failure, NULL);
- /*
- * Shut down the device drivers for good. We mark
- * all removed devices correctly to avoid access
- * the their PCI config any more.
- */
- if (pe->type & EEH_PE_VF) {
- eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL);
- eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
- } else {
- eeh_pe_state_clear(pe, EEH_PE_PRI_BUS, true);
- eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+ /* Mark the PE to be removed permanently */
+ eeh_pe_state_mark(pe, EEH_PE_REMOVED);
- pci_lock_rescan_remove();
- pci_hp_remove_devices(bus);
- pci_unlock_rescan_remove();
- /* The passed PE should no longer be used */
- return;
- }
+ /*
+ * Shut down the device drivers for good. We mark
+ * all removed devices correctly to avoid access
+ * the their PCI config any more.
+ */
+ if (pe->type & EEH_PE_VF) {
+ eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL);
+ eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+ } else {
+ eeh_pe_state_clear(pe, EEH_PE_PRI_BUS, true);
+ eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+
+ pci_lock_rescan_remove();
+ pci_hp_remove_devices(bus);
+ pci_unlock_rescan_remove();
+ /* The passed PE should no longer be used */
+ return;
}
out:
