This is a note to let you know that I've just added the patch titled
thermal/drivers/tsens: limit num_sensors to 9 for msm8939
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
thermal-drivers-tsens-limit-num_sensors-to-9-for-msm.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 92aac319f650420a68a9583f4f0839f11077118d
Author: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Date: Sun Jan 1 21:40:22 2023 +0200
thermal/drivers/tsens: limit num_sensors to 9 for msm8939
[ Upstream commit 903238a33c116edf5f64f7a3fd246e6169cccfa6 ]
On msm8939 last (hwid=10) sensor was added in the hw revision 3.0.
Calibration data for it was placed outside of the main calibration data
blob, so it is not accessible by the current blob-parsing code.
Moreover data for the sensor's p2 is not contiguous in the fuses. This
makes it hard to use nvmem_cell API to parse calibration data in a
generic way.
Since the sensor doesn't seem to be actually used by the existing
hardware, disable the sensor for now.
Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939")
Cc: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Cc: Shawn Guo <shawn.guo@xxxxxxxxxx>
Acked-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230101194034.831222-9-dmitry.baryshkov@xxxxxxxxxx
Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index f6d55e6d85dde..8d036727b99fe 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -285,7 +285,7 @@ static int calibrate_8939(struct tsens_priv *priv)
u32 p1[10], p2[10];
int mode = 0;
u32 *qfprom_cdata;
- u32 cdata[6];
+ u32 cdata[4];
qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
if (IS_ERR(qfprom_cdata))
@@ -296,8 +296,6 @@ static int calibrate_8939(struct tsens_priv *priv)
cdata[1] = qfprom_cdata[13];
cdata[2] = qfprom_cdata[0];
cdata[3] = qfprom_cdata[1];
- cdata[4] = qfprom_cdata[22];
- cdata[5] = qfprom_cdata[21];
mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
dev_dbg(priv->dev, "calibration mode is %d\n", mode);
@@ -314,8 +312,6 @@ static int calibrate_8939(struct tsens_priv *priv)
p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
- p2[9] = (cdata[4] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
- p2[9] |= ((cdata[5] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5) << 5;
for (i = 0; i < priv->num_sensors; i++)
p2[i] = (base1 + p2[i]) << 2;
fallthrough;
@@ -331,7 +327,6 @@ static int calibrate_8939(struct tsens_priv *priv)
p1[6] = (cdata[2] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
p1[7] = (cdata[3] & MSM8939_S7_P1_MASK) >> MSM8939_S7_P1_SHIFT;
p1[8] = (cdata[3] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
- p1[9] = (cdata[4] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT;
for (i = 0; i < priv->num_sensors; i++)
p1[i] = ((base0) + p1[i]) << 2;
break;
@@ -544,7 +539,7 @@ static int __init init_8939(struct tsens_priv *priv) {
priv->sensor[6].slope = 2833;
priv->sensor[7].slope = 2838;
priv->sensor[8].slope = 2840;
- priv->sensor[9].slope = 2852;
+ /* priv->sensor[9].slope = 2852; */
return init_common(priv);
}
@@ -617,9 +612,9 @@ static const struct tsens_ops ops_8939 = {
};
struct tsens_plat_data data_8939 = {
- .num_sensors = 10,
+ .num_sensors = 9,
.ops = &ops_8939,
- .hw_ids = (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, 10 },
+ .hw_ids = (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, /* 10 */ },
.feat = &tsens_v0_1_feat,
.fields = tsens_v0_1_regfields,
